User manual

Plug&View IP camera ׀ Manual ׀ EN-201310 13
The settings for "Flip Config" turn the video image by 180°, e.g. when the camera is installed on the
ceiling: "UpDown" – vertical rotation, "LeftRight" – horizontal rotation, "All" – verticale and
horizontal
rotation, "NoMove" – no rotation.
In "Power Config" determine the frequency of the site for the indoor or outdoor use of the camera. For
indoor installations and operation in Europe, select "Indoor 50Hz". For use outside Europe, e.g. in the
USA and Japan, select "Indoor 60Hz". For outdoor use (e.g. Plug&View OptiMax) select "Outdoor".
With the settings under "Brightness" you can optimize brightness, contrast and saturation of the
camera image. The default value is 128.
Under "CMOS" you can set the exposure value at which the camera switches back and forth between
day and night mode with the number behind "Wide Dynamic Range". If "IR Switch" is set to "On", the
integrated infrared LED it will be activated automatically in low light conditions. The "Off" setting
disables the LEDs and you can then specify in "Color Switch", whether the camera image should be
in black-and-white or color in low light conditions or, respectively, should automatically switch from
color to black-and-white.
"Electronic Level" to "High" or "Low" determines how sensitive the LEDs respond to changing lighting
conditions.
5.4.8 Monitor (text overlays)
You can make the time and camera name, as well as two additional textual information (Free Text)
display on the monitor (in the camera live image). The color and position of the characters are freely
adjustable.