User manual

Plug&View IP camera ׀ Manual ׀ EN-201310 15
5.5.3 System Tools
Reboot – triggers a restart of the camera. After approx.
20 seconds you can log in again
Factory default – resets the camera to factory settings.
All of the changes you have made will be lost.
SC Format – formats (FAT32) an inserted SD-card for
video and images
View Picture on SD-card – displays the recorded
images
Backup configuration file – saves the current
configuration of the camera on your PC
Update configuration file – restores the camera
configuration you had preciously stored on your PC
System update– allows you to manually update the
firmware
View video files on SD-card – shows the recorded
videos
5.5.4 User Management
In the delivery state, you logged into the camera as Administrator. As admin you can create and
delete users, who have access to the camera user interface. Normal users do not have permission to
add or delete users.
5.5.5 Device Information
Here you can see all the important technical data concerning your camera at a glance: Brand and
Type, serial number, software (firmware) version, the MAC address of the Ethernet adapters, the
current Ethernet network settings, as well as the date and time of the last time the camera was
switched on. Under SD card information you can see the maximum available capacity of the microSD-
card (if installed).
5.6 WIFI
In the user interface of the camera
click on WIFI, to configure the wireless
settings.
A search window will appear, in which
the available wireless networks in your
environment will be displayed. Please
select the identifier (SSID) of your
network and confirm with "OK".