User manual

Plug&View IP camera ׀ Manual ׀ EN-201310 16
In the next window enter the WLAN-key and confirm with "OK".
Next, the connection to your wireless LAN is established. The
indication "Wifi connection will be established" is blinking in
YELLOW. If the connection was successfully established, this will
be displayed in a separate window. The display then changes to
"Wifi connection".
You can now remove the network cable from the camera and close
the browser window.
Trademarks
DIGITUS is a registered trademark ASSMANN Electronic GmbH.
Apple, Apple APP Store are registered trademarks of Apple Inc.
Android, Google, Google play are registered trademarks of Google Inc.
AVM Fritz!Box is a registered trademark of AVM Computersysteme Vertriebs GMBH.
Telekom Speedport is a registered trademark of Deutsche Telekom AG.
Note:
All other trademarks not listed here, are the property of their respective owners.
Trademarks or trade names mentioned in this manual are used to describe the operating steps and do not
imply that they are freely available. In any case they are the property of the respective holder of the rights.
The ASSMANN Electronic GmbH hereby declares that the IP cameras, type Plug&View, are in accordance
with the requirements and provisions of the Directive 1999/5/EC.
The full Declaration of Conformity can be found under http://www.digitus.info.