User manual

Plug&View IP camera ׀ Manual ׀ EN-201310 8
5.4 Parameters
This is where you configure Network, Video Parameter, DDNS & UPnP, Video Cover, motion
detection, Alarm Setting, CMOS Sensor and Monitor.
5.4.1 Network
Here you assign a fixed IP address to the camera, according to the configuration of your LAN, or
select DHCP if you are using a DHCP-server, such as your router, for the assigning of IP-addresses.
The ports for HTTP, RTSP and RCFG can be modified here, if port forwarding settings are required
on your router.