User manual

Plug&View IP camera ׀ Manual ׀ EN-201310 9
5.4.2 Video Parameter
Under Video Parameter you can configure the resolution, bit rate, Type, frame rate and image quality
of the video stream.
You can choose between 'high' and 'normal video quality'. 'High Quality Video' is used mainly for
high-resolution video streams via a PC with higher clock frequencies and faster Internet connection.
'Normal video quality' is usually for use with mobile phones. The main- and sub stream modes
support Constant Bit Rate (CBR) and Variable Bit Rate (VBR). You can select between 5 levels in the
Image Quality settings: from very high to very low.
5.4.3 DDNS & UpnP
If you want to have additional access to the user interface via a DynDNS provider, activate Dynamic
DNS by selecting "on" and enter your domain and access data. If the camera handles the assignment
of the ports and the forwarding via UPnP, please note, to also adjust the necessary settings on your
router (changes to the security settings to allow UPnP).
5.4.4 Video Cover
"Video Screen" marks any specific area within the video image which is blacked out during a
recording. Activate Video Screen by clicking on "on". Then click inside the video image and drag with
the mouse button from the top left to the bottom right corner of the desired area. A high-lighted color
box will appear, which represents the covered area. Click on "Region 2" to select another area and
repeat the process. Once you have selected up to 4 areas, finish the process by clicking on "OK".