User manual

8 Plug&View IP camera ׀ QIG Rev. 2-0 ׀ ML-201405
Click on "DIGITUS
®
Plug&View", to let the DIGITUS
®
App scan the
code.
Android devices show a grid on the display. Move the camera
forward or backward until the QR-code fits into the grid.
Apple
®
iOS devices do not show a grid. To scan a QR-Code with an
Apple
®
iOS device, you may need to move the device backward
and forward a couple of times, until it recognizes the code.
Adding the camera though manual input of MAC-
address and activation code
The MAC-address and the activation code are located on the last
page of this guide. After you have selected "add camera" in the
Plug& View App, please enter the number and letters combinations,
which you find under "MAC". Then enter your activation code and
click "Apply".
After adding the camera, please check in the camera list of the app,
whether your camera is displayed with a small preview image.