6/24 Port Desktop & Rack-mountable Fast Ethernet Switch User Manual
Certification FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Package Contents The following items should be found in your package: 16/24 Port Desktop or Rack-mountable Fast Ethernet Switch Power Adapter User Manual Rack Brackets Screws Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from.
Content 1. INTRODUCTION 5 1.1. PRODUCT OVERVIEW 5 1.2. MAIN FEATURES 5 1.3. STANDARDS 6 1.4. WORKING ENVIRONMENT 6 2. INSTALLATION 7 2.1. BEFORE INSTALLATION 7 2.2. INSTALLATION 7 2.3. CONNECTING THE 16/24 PORT DESKTOP & RACK-MOUNTABLE FAST ETHERNET SWITCH TO YOUR NETWORK 8 2.4. LED INDICATORS 8 3.
1. Introduction 1.1. Product Overview The 16/24 Port Desktop & Rack-mountable Fast Ethernet Switch is designed to allow simultaneous transmission of multiple packets via an internal high-speed data channel. This means that it can partition a network more efficiently than bridges or routers in most environments .This 16/24 Port Desktop & Rack-mountable Fast Ethernet Switch is a highly reliable network switch and is the ideal device for bridging Ethernet to Fast Ethernet work groups or networks .
1.3. Standards IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control IEEE 802.3az 1.4.
2. Installation 2.1. Before Installation Take note of the following conditions before using your switch: Install the 16/24 port desktop & rack-mountable fast Ethernet switch in a fairly cool and dry place. See Working Environment for the acceptable operating temperature and humidity ranges Install the switch in a site free from strong electromagnetic sources, vibration, dust, and direct sunlight. Leave at least 10cm of space to both the left and right of the switch for ventilation.
2.3. Connecting the 16/24 Port Desktop & Rack-Mountable Fast Ethernet Switch to Your Network Description PWR 1X-16X/24X Function Connect to power adapter provided with unit. Don’t use other power adapters as your switch could be damaged. These ports support network speeds of 10Mbps or 100Mbps, and can operate in half and full-duplex transfer modes. These ports also support automatic MDI/MDIX detection, which gives the Switch true ‘plug and play’ capabilities.
3. Troubleshooting 1. The Power LED is not lit Check if the AC power cord is well connected. Try to unplug and plug back in the power cord to the switch or try another power outlet. 2. The Link LED is not lit Make sure the network configuration of connecting device is correct, and network card and drivers are installed correctly. Check the cable connections. Make sure the cable distance between the switch and other IEEE802.3 compatible network device does not exceed 100 meters. 3.
