User manual

7
2. Installation
2.1. Before Installation
Take note of the following conditions before using your switch:
 Install the 16/24 port desktop & rack-mountable fast Ethernet switch in a fairly
cool and dry place. See
Working Environment for the acceptable operating
temperature and humidity ranges
 Install the switch in a site free from strong electromagnetic sources, vibration,
dust, and direct sunlight.
 Leave at least 10cm of space to both the left and right of the switch for ventilation.
 Visually inspect the AC power jack and make sure the power adapter cord is
securely connected.
 Do not place items on top of switch
2.2. Installation
 Desktop or Shelf Installation
When installing the switch on a desk or shelf, the rubber feet included with the
device should first be attached. Attach these cushioning feet on the bottom at
each corner of the device. Allow enough ventilation space between the device
and the objects around it.
 Rack Installation
The Switch can be mounted in an standard 1U rack space. To install, attach the
mounting brackets (one on each side) and secure them with the screws provided.
Then, use the screws provided with the rack to mount the Switch in the rack.