User manual

8
2.3. Connecting the 16/24 Port Desktop &
Rack-Mountable Fast Ethernet Switch to Your
Network
Description Function
PWR
Connect to power adapter provided with unit. Don’t use
other power adapters as your switch could be damaged.
1X-16X/24X
These ports support network speeds of 10Mbps or 100Mbps,
and can operate in half and full-duplex transfer modes.
These ports also support automatic MDI/MDIX detection,
which gives the Switch true ‘plug and play’ capabilities. Just
connect any network cable from a device to the switch, and
the switch will automatically detect the settings of the device
and adjust itself accordingly.
2.4. LED Indicators
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the switch, connection or attached devices.
LED Function
PWR
On Power on
Off Power off
LINK/ACT
ON Corresponding port connection normal
Flashing Corresponding port data transmitting
Off
Corresponding port connection abnormal/not
connected
10/100M
ON Corresponding port works at 100Mbps
OFF Corresponding port works at 10Mbps