Datasheet

24
configuration security. At least one Shared Key field must be
populated to enable security using a shared key.
Click on the radio button to set the key as the default
encryption key.
WEP Key Size
Defines the size for each encryption key. The options include:
o 64- bit (enter 10 digits for hexadecimal, 5 ASCII
characters)
o 128- bit (enter 26 digits for hexadecimal, 13
digits for ASCII)
o 152-bit (enter 32 digits hexadecimal, 16 digits
for ASCII)
4. Click OK for the changes to take effect.
Overwriting an Existing Static WEP Key
1. Click the Define Pre-Shared Keys radio button on the Security tab.
2. Click on Configure.
3. In the window, all existing static WEP keys are displayed as asterisks for security
reasons. Click in the field of the existing static WEP key to overwrite.
4. Delete the asterisks in that field.
5. Enter a new key.
6. Make sure to select the Transmit Key button to the left of this key is selected for the
key to transmit packets.
7. Click OK.
Disabling Static WEP
To disable static WEP for a particular profile, choose None on the Profile
Management tab and click OK.
OR: Select any other security option on the Profile Management tab to automatically
disable static WEP.