User manual

You’ll be prompted to input connection parameters for the wireless

access point you wish to connect:

Required parameters are:

Profile name You can give a name to this profile, so you can

remember its purpose easily. It can be any

phrase to help you remember.

Network Name (SSID) The SSID (Service Set IDentifier, i.e. access

point’s name). This must be identical with the

SSID of the access point you wish to connect.

This is a

computer-to-computer

(ad hoc) network

Check this box if you wish to connect to another

computer / network device by ad hoc method.

When not accessing to wireless access point,

you have to check this box.

Channel Select wireless channel for ad hoc connection.

This option only appears when you’re using ad

hoc connection.

Network

Authentication

Select the network authentication type from

drop-down menu. This setting must be identical

with the setting of wireless access point you with

to connect.

Data encryption Select the data encryption type from drop-down