6/24 Port Desktop & Rack-mountable Gigabit Ethernet Switch User Manual DN-80100 • DN-80110
Package Contents The following items should be found in your package: • 16/24 Port Desktop & Rack-mountable Gigabit Ethernet Switch • Power Adapter • Quick Installation Guide • Rack-mount Bracket • Screw Make sure that the packets contains above items. If any of the above items is missing or damaged, please contact your distributor.
Content 1. INTRODUCTION .................................................................. 1 1.1. PRODUCT OVERVIEW................................................. 1 1.2. MAIN FEATURES......................................................... 1 1.3. STANDARDS................................................................ 1 1.4. WORKING ENVIRONMENT ......................................... 2 2. HARDWARE INSTALLATION............................................. 2 2.1. BEFORE INSTALLATION .....................
1. lntroduction Thank you for choosing the 16/24 Port Desktop & Rackmountable Gigabit Ethernet Switch. 1.1. Product Overview The 16/24 Port Desktop& Rack-mountable Gigabit Ethernet Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients.
1.2. Main Features • • • • • • • • • • Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T specifications 32/48Gbps switching fabric capacity 16/24 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch Full/Half-Duplex capability on each TX port (only support full duplex in 1000M) IEEE802.
2.lnstallation 2.1. Before Installation The setup of the Switch can be performed using the following steps: • Install the 16/24 Port Desktop & Rack-mountable Gigabit Ethernet Switch in a fairly cool and dry place. See working environment for the acceptable operation temperature and humidity ranges • Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight • Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
2.3. Connecting the 16/24 Port Desktop & Rackmountable Gigabit Ethernet Switch to Your Network Description Function Connect to Power adapter, please don't use the PWR unknown power adapter, otherwise your device may be damaged. These ports support network speeds of 10Mbps, 100Mbps or 1000Mbps, and can operate in half and full duplex transfer modes. These ports also support automatic MDI/MDIX crossover detection, which gives the Switch true 'plug and 1X-16X/24X play' capabilities.
3.Troubleshooting 1. The Power LED is not lit • Check if the AC power cord is well connected. Try to unplug and plug back in the power cord to the switch or try another power outlet. 2. The Link LED is not lit • Make sure the network configuration of connecting device is correct, and network card and drivers are installed correctly. • Check the cable connections. • Make sure the cable distance between the switch and other IEEE 802.3 compatible network device does not exceed 100 meters. 3.
