Instructions

ManualsBrandsDigitus ManualsComputing & OfficeDigitus DN-95317 Network switch 8 ports 10 / 100 / 1000 Mbps PoE

8-Port Gigabit Ethernet PoE

10" rack-mount Switch

Manual

DN-95317

Product Description:

The DIGITUS Gigabit Ethernet PoE Switch with eight Power over Ethernet ports,

offers your network significant improvement in terms of performance and efficiency.

Thanks to PoE support, you only need a single (network) cable for power and data

transfer. This switch makes it much easier to connect devices such as access points,

network cameras, and IP telephones, and requires far less cabling than alternatives.

It also allows you to extend your network in places where there are no power supply

cables or sockets available. The switch does not require any configuration and

therefore guarantees quick and seamless integration into the network. Moreover, the

fanless design of the Switch ensures soundless operation, which makes this device

the perfect solution for office environments and meeting rooms.

Summary of content (5 pages)

PAGE 1
8-Port Gigabit Ethernet PoE 10" rack-mount Switch Manual DN-95317 Product Description: The DIGITUS Gigabit Ethernet PoE Switch with eight Power over Ethernet ports, offers your network significant improvement in terms of performance and efficiency. Thanks to PoE support, you only need a single (network) cable for power and data transfer. This switch makes it much easier to connect devices such as access points, network cameras, and IP telephones, and requires far less cabling than alternatives.
PAGE 2
PoE IP Camera PoE IP Camera Data PoE IP Camera Data + Power PoE IP Camera Product Features: • • • • • • • • • • • • • • • 8-Port 10/100/1000 Mbps PoE Gigabit Desktop Switch Ethernet IEEE802.3/802.3u/802.3x/802.3ab/IEEE802.
PAGE 3
Product Specifications: Item Summarize Fixed port LED Indicators Input voltage Network Media Forwarding Rate Power Supplies Operating temperature Storage temperature Relative humidity Thermal methods Switching capacity MAC address table Weight PoE PoE port PoE Standard Pin assignment Description 8x 10/100/1000Base-TX ports PWR, PoE, Link/Act LED 100V~240V AC, 50/60Hz (for power adapter) 48VDC (for switch) 10BASE-TX: UTP category 5, 5e cable 100BASE-TX: UTP category 5, 5e cable 1000BASE-TX: UTP category 5
PAGE 4
Hardware Description:  The Front Panel The front panel consists of LED Indications.  LED Indicators Per Device: Power Per Port: LINK/ACT (Link/Activity) Per PoE Port: PoE Figure 1. Front Panel view LED Status Color Description Power On Green The switch is supplied with suitable power. On Green The port is connecting. Blinks - The port is receiving or transmitting data. Off - The port is not linked successfully with the device. On Green Off - LINK/ACT PoE Figure 2.
PAGE 5
 RJ-45 Ports (Auto MDI/MDIX) 8 auto-sensing ports of 10Base-T, 100Base-TX or 1000Base-TX connections. All ports can support Power over Ethernet to power devices. Remark: MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you can connect to another Switch or workstation without changing pin-to-pin or crossover cabling.  AC Power Connector Plug the female connector into the switch and male connector into a power outlet.