Specifications

2-PORT / 4-PORT
MINI USB KVM Switch
User Manual
(DS-11200 / DS-12200)
Features
 Controls PCs with one USB keyboard, USB mouse
and monitor respectively
 Supports USB computers
 Supports USB 1.0, 1.1, 2.0 Specification compliant
and supports UHCI, OHCI & EHCI host controller
 Supports USB Boot protocol & Wakeup Device
 Supports the windows, Linux, Macintosh with USB
connection
 Superior video quality - Up to 2048 x 1536, DDC,
DDC2, DDC2B, DDC2AB, 200MHz
 2 ways for PC selection -- hot key or mouse
clicking
 Easy to install--No software required
 Hot Pluggable
 Auto scan function to monitor PCs
 Auto skips over the power-off PC
Specifications
Function DS-11200 DS-12200
PC Connectors 2 4
Port Selection
Hot Key
/ Mouse Clicking
LEDs Selection 2 4
Emulation
Keyboard USB
Mouse USB
Console
Connector
Keyboard 1x USB A-Type
Mouse 1x USB A-Type
Monitor 1x HD-15 Female (Std. VGA/SVGA)
CPU
Connector
Keyboard
/ Mouse
2x USB A-Type 4x USB A-Type
Monitor 2x HD-15 Male 4x HD-15 Male
VGA Resolution
2048x1536 (Max.), DDC, DDC2,
DDC2B, DDC2AB, 200MHz
Scan Interval 5 sec ~ 30 sec
Housing Plastic
Weight 230 g 460 g
Dimensions (LxWxH) 64x47x24 mm 90.5x62.5x24 mm
Cable Length 1.2 meter
Hardware Requirements
Required specifications
Console
One highest resolution VGA, SVGA or Multisync monitor
One USB mouse
One USB keyboard
PC
One VGA, SVGA or Multisync card
One USB port
Installation
Before the installation, make sure the peripherals of all PCs are
grounded properly and turned off.
1. Connect the monitor, keyboard and mouse with the Console
Port Connectors.
2. Plug the CPU Port Connectors into the PCs.
3. Turn on the PCs.
Operation
1. The function of LED display:
LED DISPLAY DESCRIPTION
Green light flashing
PC power on, connected and
selected
2. Two ways for PC selection – hot key or mouse clicking
2-1 Mouse clicking
Item Operation Function
DS-11200
[Middle button] + [Left Button]
or
[Middle button] + [Right
Button]
Access between
two PCs.
DS-12200 [Middle button] + [Left Button]
Switch to the
previous PC.
DS-12200
[Middle button] + [Right
Button]
Switch to the next
PC.
Note: 2-Key Mouse is NOT applicable.
2-2 Hot Key option
Hot Key Navigation allows you to select PC from the
keyboard directly.
Options for Hot Key Navigation:
 Select PC by Hot Key
 Command mode
 Auto scan mode
Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Item Hot Key
Operation
Function
DS-11200
[L Ctrl] + [L Ctrl] or
[R Ctrl] + [R Ctrl]
Access between two PCs.
DS-12200 [L Ctrl] + [L Ctrl] Switch to the previous PC.
DS-12200 [R Ctrl] + [R Ctrl] Switch to the next PC.