Specifications

Contact Name

This string is sent as the system.sysContact value. It should describe who to contact regarding this

machine. Typically it includes an email address.

Traps

Trap/Inform Community

When trap messages are sent, they are sent using this community. This should be a community that

exists on your trap server.

Trap Sink 1 (primary)

This host will be the target for any traps/inform messages sent. These address must be specified

numerically. Leave blank if not needed.

X. How to Setup RADIUS authentication

Please click on RADIUS

to get the following image.

The RADIUS server requires the IP address, the UDP port number (1812 - default or 1645) and the

shared secret. The shared secret is used to encrypt communications and corresponds to a shared

password for the RADIUS server and the client machine. Two additional servers may be defined for

backup purposes. Each server will be tried in order, using the indicated number of retries and timeout

period, which are configurable on the same page. Remember to enable RADIUS after configuring it.