ESATA II EXPRESS CARD User Manual DS-31101-1 All brand names and trademarks are properties of their respective owners.
Features and Benefits Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module Serial ATA generation 2 transfer rate of 3.
Hardware Installation General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed. Insert the Card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection. Driver Installation 1. Please insert the CD driver bound with eSATA II 300 1-Port ExpressCard into your CD-ROM Drive. 2. At the Windows desktop, click Start, Run. 3.
Hot-Plugging Hard Disk Drives To remove a drive from a powered up system, do the following: 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Click Disk Drives, right click the target disk and select Disable/Enable. 4. You can now remove the target disk.
