User`s manual

- 9 -
3 Operations
3.1 Active Console Selection by Push Button
You can press the push button on the local unit to change the active console of operation. There
are three types of active console configurations:
1. Local Console Only
You can operate the system only from the local unit.
2. Remote Console Only
You can operate the system only from the remote unit.
3. Both Consoles
You can operate the system from both the local and remote unit.
The default configuration is “Both Consoles” mode. Once you change the active console
configuration, it will be saved and will not be affected by unit reset.
The active console can be shown via “Selected Indicators” of LED indicator, please refer the
description of next sections
3.2 LED Indicators
The LED indicators of the remote console are the same as the local ones, if both units are
connected successfully; or all LED indicators at remote console will turn OFF.
 Selected Indicators (RED)
 Both Selected:
Indicates that you can control your system from both the local and remote console.