User`s manual

- 10 -
 Local Selected:
Indicates that you can control your system from the local console only.
 Remote Selected:
Indicates that you can control your system from the remote console only.
 Active Indicators (GREEN)
Indicates the connection status:
 Local Indicator:
Indicates whether the connection between the local unit and computer is ready or not.
 Remote Indicator:
Indicates whether the connection between the local and remote unit is ready or not.
 Examples of LED Indicators:
 Both consoles are selected, local active is ON, remote active is OFF:
It means that the connection between the local unit and the computer is ready, but the
CAT5 connection between the local and remote unit is not ready. In this case, you can
only control your system at the local console, because the remote console is not
connected successfully. The following indicators are shown at the local console, all LED
indicators will be OFF at the remote console because of disconnection.