User`s manual

- 11 -
 Both consoles are selected, local active is OFF, remote active is ON:
It means that the CAT5 connection between the local and remote unit is ready, but the
local unit is not connected to the PC correctly or the PC is not turned on. In this case,
you cannot control your system from any console, because the PC is not available to
control.
 Both consoles are selected, local active is ON, remote active is ON:
Connection of the local and remote unit is successful; you can control your
system at the local and the remote console.
 Active console is inconsistent with selected console:
You cannot control your system if the active console is inconsistent with the selected.
3.3 Buzzer sound Disable / Enable by Hotkey
 Press <Left Shift> or <Right Shift> twice, then <B> and <Enter>. The buzzer sound will be
disabled / enabled alternately. The buzzer sound default setting is ON.
< Shift > → < Shift > → <B> → <Enter>