User`s manual

- 8 -

 Cable Connection Diagram

1 Monitor

2 PC

3 Video/KB/MS

USB mouse

USB keyboard

2.3 Hardware Installation

1. Switch off all devices.

2. Connect your monitor, USB keyboard/mouse to the local unit, if you want to control your

system at the local console.

3. Connect your monitor, USB keyboard/mouse to the remote unit, if you want to control your

system at the remote console.

4. Connect the remote and local unit by using a CAT5/CAT5E/CAT6 cable; the supported

maximum cable length is 200 meters.

5. Connect the 5V power supply to power on the local unit.

6. Connect the 5V power supply to power on the remote unit.

7. Connect video and/or USB keyboard/mouse of local unit and computer/KVM by using the

supplied cables.

8. Turn on your computer if it was turned off.

9. Adjust video quality by using brightness or focus skew if necessary.