Instruction Manual

BT series

Operator’s Manual

Congratulations for purchasing DIGIWEIGH BT series precision pocket scale. With normal care and proper

treatment, the scale will provide years of reliable service. Please take a few minutes to read the Operator’s

Manual so that you can become acquainted with the proper usage and special features of your DIGIWEIGH

pocket scale.

SPECIFICATIONS

Please check the rating label located on the bottom of your scale and find the capacity and readability. Now

DIGIWEIGH BT series is providing following capacity and readability combinations:

Model DW-250BT

Capacity: 250 g or 8.82 oz or 3857 gn or 1250 ct or 160.8 dwt or 8 ozt

Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt

Model DW-350BT

Capacity: 350 g or 12.35 oz or 5400 gn or 1750 ct or 225.1 dwt or 11.2 ozt

Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt

Model DW-500BT

Capacity: 500 g or 17.64 oz or 7715 gn or 2500 ct or 321.5 dwt or 16 ozt

Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt

Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt

HOW TO USE THE SCALE

Place the scale on a rigid horizontal flat surface.

Hold both side of the cover and slide the cover to the left to expose the plat form. Or you can pull the sliding

cover out to use it as a scoop. Slide the cover back in after using.

Take out the tray on the platform and flip it over to use it as a tray if needed.

Press ON/OFF button to switch on the scale and wait until “0.0” is showed on the display screen. Please

make sure the scale is under the environment with stable temperature.

Put the object(s) on the center of the platform. Wait until the display is stable. The readout equals the

weight of the object(s) on the platform.

Press MODE button to choose different weighing units.

After use, just press ON/OFF to switch off the scale. Slide the cover back in.

HOW TO USE TARE FUNCTION

Tare function can make it easier to weigh tiny things or liquid.

Press ON/OFF button to switch on the scale. Put the container of weighing object(s) on the center of

platform, press TARE button and the screen shows “0.0”. Take the container off and put the weighing

object(s) in the container and put the container again on the center of the platform.

Wait until the screen is stable, the readout equals the weight of the weighing object(s).

PAGE 1
BT series Operator’s Manual Congratulations for purchasing DIGIWEIGH BT series precision pocket scale. With normal care and proper treatment, the scale will provide years of reliable service. Please take a few minutes to read the Operator’s Manual so that you can become acquainted with the proper usage and special features of your DIGIWEIGH pocket scale. SPECIFICATIONS Please check the rating label located on the bottom of your scale and find the capacity and readability.
PAGE 2
MAINTENANCE Avoiding any exposure to extreme heat or coldness. Your scale works better when operated at normal room temperature. Always allow the scale to acclimate to normal room temperature for at least one hour before using. Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and close distance to other electronic equipment may cause an adverse effect on the reliability and accuracy of your scale. Handle the scale with care.