Electronic Balance Model: DWP-B3003 USER MANUAL
Ⅸ. Fittings of Balance Balance main body 1 set, external power cord 1pc, pan 1pc, operation manual 1 pc Note: optional RS232 functions with CD-ROM and data line 1 pc. Ⅹ. Guarantee to repair The balance is guranteed for one year (from the date of sale) warranty period. Following no warranty: 1. Out of warranty 2. Due to incorrect use or damage caused by impact 3. Acid corrosion, damage caused by radioactive substances in the environment 4. Damages caused by arbitrary operation.
INDEX I. Key Functions of Balance-----------------------------------1 Ⅱ. Installation of Balance-------------------------------------1 Ⅲ. Turning On --------------------------------------------------1 Ⅳ. Calibration---------------------------------------------------2 Ⅴ. Funtion of Counting ---------------------------------------3 Ⅵ. Unit Conversion---------------------------------------------3 Ⅶ. RS232 Operation (Optional function)------------------4 Ⅷ.
7---- data 15---- ENTER 8---- data or radix point 16---- line feed Ⅶ. RS232 Operation (Optional function) Stnadard RS232 comminication interface can be optional. Sandard Ⅷ.Precautions of Use 9-pin RS232 cable can be used to communicate with the computer. Turn on according to the regulations before use, preheat and then calirate the balance with standard weight. Don’t use the balance in explosion hazardous environments.
ⅠKey Functions of Balance Ⅳ. Calibration ON/OFF UNIT PCS CAL TAR 1. Calibration should be taken after turning on and preheating for switch key unit conversion key counting key calibration key taring & zere setting key 10-30 minutes. 2. Calibration: In the case of the balance doesn’t load any object, press “CAL” calibration, after 5 seconds it display “—CAL—”, release the key, later it displays “calibration weight value” is flashing.
flashing calibration value , then load corresponding weights value, until the balace return to zero after remove the weights, which means that the linear calibration is complete. V. Funtion of Counting 1.Counting In standby mode of the balance(with the container should be peeled) it dilplays “0.000”, press the “PCS” key, “10” flashes, the lower right corner displays “g” convert to “pcs”.
