D-Terminator Scale, May 2007 5/22/07 8:33 AM Page 1 8009 E. Dillon’s Way • Scottsdale, AZ 85260 Technical Support: 800-223-4570 illon recision Products, Inc.
D-Terminator Scale, May 2007 5/22/07 8:33 AM DILLON D-TERMINATOR INSTRUCTIONS Page 2 Fig. 2 Congratulations on your selection of the Dillon D-Terminator high precision electronic scale. The D-Terminator is a highly sensitive Electronic Computerized Load Cell Scale. With many features only found in very expensive laboratory and jeweler’s scales, the D-Terminator is balanced and designed for multi-purpose usage. The maximum capacity is 57 Grams or 900 Grains and the resolution is 0.01 GRAMS or 0.
D-Terminator Scale, May 2007 5/22/07 8:34 AM Fig. 4 Page 3 Fig. 6 The scale is now on. The display will show “+88.8.8.8.” and then “0.00” with a small arrow pointing to “g:gram” on the extreme right side of the display. This indicates that the scale is ready to use. The “CAL/MODE” key will allow you to toggle between GRAMS and GRAINS after turning the scale on, even if there is something being weighed at the time. 4.
D-Terminator Scale, May 2007 5/22/07 8:34 AM covered area. This prevents inaccurate readings due to static electricity build up. (A feature normally found only on very expensive laboratory scales). 5. This scale features an automatic shut-off after approximately three minutes of inactivity (battery power only) at which time it will shut itself off. This conserves battery power and protects the scale from being left on for prolonged periods of time when not in use. Page 4 Fig. 9 Fig. 8 Fi g .
D-Terminator Scale, May 2007 5/22/07 8:34 AM “CAL 0” which indicates that zero point is set FIG 12. 4. GENTLY place the 50 gram calibration weight on the platform and wait until “CAL F” is displayed. FIG 13. The scale is now calibrated and ready to use. NOTE: IF “CAL E” APPEARS INSTEAD OF “CAL F” GO TO STEP 5. Page 5 calibration process. Repeat the process until “0.00” appears. E. Operation of the Scale (weighing powder): 1. Place the empty pan on the scale. FIG 15. Fig. 15 Fig.
D-Terminator Scale, May 2007 5/22/07 8:34 AM Page 6 on the scale. 6. Turn the scale off when you are finished. Fig. 17 CAUTION: 1. Place objects onto the weighing platform VERY GENTLY. 2. Do Not weigh any object which will exceed the capacity of the scale. This could permanently damage the load cell sensors. (The scale's capacity of 900 grains is equal to about 2.0 ounces). The powder pan weighs about 190 grains and this must be considered. 3.
D-Terminator Scale, May 2007 5/22/07 8:34 AM TECHNICAL SUPPORT 1-800-223-4570 The D-Terminator digital scale is covered by a one-year manufacturer’s warranty. Contact Dillon Precision for technical support at: 1-800-223-4570 or FAX: 480-998-2786 For REFUNDS return the scale to: Dillon Precision Products, Inc. 8009 E. Dillon’s Way Scottsdale, AZ 85260 Please note that it is necessary to first call our technical support number and obtain a RMA (Return Merchandise Authorization) number.