User`s manual

9 INSTALLATION

This menu contains following

items:

• Automatic search cable

• Manual search cable

• Automatic search terrestrial

• Manual search terrestrial

9.1 Automatic Search Cable & Manual Search Cable

You have two options for the scan of cable channels. If you already know the

parameters of the channels you wish to find, use the manual Channel Search

and enter the required parameters accordingly.

Otherwise use the Automatic Channel Search in which all Frequencies are

scanned.

In Manual Mode the search begins with

the Start frequency.

Enter the Symbolrate and Constellation.

Depending on the cable Network choose

“Network Scan” on for a fast search for

all channels.

To start the channel scan please enter

the following parameters and press the

RED key.

• Start frequency: Enter the Transponder

frequency by pressing OK and using the numeric keys to enter the according

Value.

• Constellation: This is an extended Parameter which specifies how the digital

TV-Signal is transmitted. Your TV-Network Operator will inform you about the

correct value.

• Symbolrate: Enter the Symbolrate using the OK- and the numeric keys.