50” (127 cm) Professional QFHD 3D display DM504MAS User Manual
Warning this is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Safety Instructions for DM504MAS Read and follow these instructions: 1. This product must be earthed. 2. The mains plug or appliance inlet is used as the disconnect device and should be easily accessible. 3. Use only an approved power cord or interconnection cable. 4.
Mounting The display can be placed on a table stand or wall-mounted. A table stand is not supplied with the display, but can be purchased separately. Furthermore, the display can be mounted with VESA 400x400 (MIS-F) compliant universal wall supports, ceiling supports or universal floor stands. Upon selecting a mount the weight of the display (45 kg) should be taken into account. Fitting the table stand For use of the separately available table stands, make sure that the fasteners are properly tightened.
Document Information Info Content Title 50” QFHD 3D Display, User Manual Date April 11, 2013 Security The material and the information contained herein are proprietary to Dimenco Displays B.V. Copying, reproduction, adaptation, modification or dissemination in whole or part is not permitted without the prior written consent Dimenco Displays B.V. Contact http://www.dimencodisplays.
Display User Manual Dimenco Displays Table of Contents 1 Introduction ......................................................................................................................................... 6 2 Product features ................................................................................................................................. 7 2.1 Global product features .....................................................................................................
Dimenco Displays 1 Display User Manual Introduction The autostereoscopic 4k 50” LCD display offers a magnificent resolution of 3840x2160 pixels. Combining Dimenco Nabla and Clear View technologies, the 4k display delivers the best depth performance, widest viewing angle, lowest cross-talk, and deepest black levels. The 50-inch 3D display from Dimenco Displays offers state-of-the-art lenticular lens design creating a variety of distinct autostereoscopic views.
Display User Manual Dimenco Displays 2 Product features 2.1 Global product features Add an extra dimension to your professional application with Dimenco Displays 3D monitors. Based on unique technology, its stunning 3D effect immediately grabs the attention and gives a more entertaining experience to the viewer. This ‘magical’ appeal attracts the consumer’s attention making it ideal for use in digital signage, point-of-sale advertising, games and 3D visualization.
Dimenco Displays Display User Manual 2.2 Technical aspects and details Group Item DM504MAS LCD panel Type a-si TFT active matrix Resolution 3840 x RGB x 2160 Effective viewing area 1095.8 x 616.4 mm Size 50’’ Pixel pitch (sub pixel) 0.0955(H) x 0.2865(V) Contrast ratio (typical) 5000:1 Aspect ratio 16:9 Brightness 400 cd/m Response time gray-to-gray (typical) 6.5 ms Refresh rate 30 Hz Display colors 1.
Display User Manual Dimenco Displays 2.3 Cosmetic specifications 2.3.1 Description This specification standard is applicable to: 3D displays supplied by Dimenco Displays. 2.3.2 Environmental conditions of inspection The environmental conditions and visual inspection shall be conducted as below. • Ambient temperature in the range 15-25 [oC]. • Humidity in the range 25-75 [%RH].
Dimenco Displays Display User Manual 2.3.4 Inspection Criteria Definitions: • Dot defect: If the size of a dot defect is larger than 0.5 times a single pixel, it can be regarded as one dot defect. • Bright dot: Dot appears bright and the size is fixed in a black pattern. • Dark dot: Dot appears dark and the size is fixed in pure red, green and blue pattern. 2.3.4.
Display User Manual Dimenco Displays 3 Scope of supply, Set up and mounting 3.1 Scope of Supply The contents of the box: • Display DM504MAS • Mains cords (EU) • DVI cable • Quick installation guide • Cardboard box with cushions The following items can be purchased separately: • Table stands 3.2 Image retention IMPORTANT: Always display alternating content with your application.
Dimenco Displays Display User Manual 3.4 Cleaning instructions Before cleaning the display, disconnect the power cord and DVI cable. It is preferable to clean the front of the display with the cleaning products listed in the table below.
Display User Manual Dimenco Displays 4 Software installation This chapter contains the prerequisites for the PC hardware and the operating system for the software. First, check whether your PC complies with the requirements that are given in the next sections. Then follow the installation instructions, where you will be guided step by step through the software installation procedure. 4.
Dimenco Displays Display User Manual 5 Trademarks, Copyrights and disclaimer Specifications are subject to change without notice. Trademarks are the property of Dimenco Displays B.V. or their respective owners. 2013© Dimenco Displays B.V. All rights reserved. 14 of 15 ©2013 Dimenco Displays B.V.
Display User Manual Dimenco Displays 6 References The following references are not normative but informative. Description VESA Display data channel standard; Version 3; December 15, 1997 VESA Display data channel command interface (DDC/CI) standard; Version 1; August 14, 1998 Digital Visual Interface DVI; Digital Display Working Group; Revision 1.0; April 02, 1999 VESA enhanced extended display identification data standard; Release A, Revision 1; February 9, 2000 ITU-R BT.709.