Remote Installation Guide

6
Install Remote Control Receiver
Locate and insert the plug 1.
connector on the remote
control bracket into plug
connector on the replace.
(FIGURE 4)
Place antenna under remote 2.
bracket.
Locate and install the two 3.
screws on the remote control
bracket.
Replace the log by inserting 4.
front edge and pushing the
back down until rear tab snaps
under back ledge (FIGURE 2)
and the logs are resting against
mirror.
5. Replace log grate using two
screws previously removed.
FIGURE 4
Remote Control Receiver
Plug
Connector
Remote Kit Installation
FIGURE 5
Manual Controls & Indicator Lights