Owner`s manual

12 www.dimplex.com
Fireplace Installation
stalled away from showers, tubs,
etc. Never locate replace where
it may fall into a bathtub or other
water container.
Voltage Selector Switch
WARNING: Ensure that the
incoming power supply voltage
matches the setting of the voltage
selector switch.
CAUTION: When changing
the voltage selector switch from
240V to 120V ensure that the
power supply is turned off.
!
NOTE: The voltage selec-
tor switch is located as seen in
Figure 5.
Using a at headed screwdriver
change the switch to correspond
to the incoming voltage: 240V -
Figure 8
2 x 8 Framing
Figure 9
Mounting hole
Mounting hole
Wall
surface
Figure 6
Figure 7