User Manual

Functions

START/STANDBY

This button is used to switch the unit ON and OFF.

AIR SWING

This button is used to activate the air swing (oscillation) function. This unit has a range

of 60°.

WIND SPEED

This control gives you the option of switching between low, medium and high speed.

WIND TYPE

Press the button to select among these three types of wind: Normal, Sleep and Natural.

The indicator light will show which type of wind has been selected.

TIMER

This evaporative cooler comes with an 7 hour TIMER that allows you to pre-set the

machine to switch off or switch on automatically, in hourly intervals.

To operate, simply select the number of hours ahead you wish the machine to switch

off or on. If you want it to run continuously, ensure the TIMER mode is deselected.

COOL WIND

Press this button to turn on or off the COOL WIND function. This is more effective

in dry, hot weather. If the indicator light flashes, water is required to be added. After

stopping the cool wind function for 2 minutes, pull out the water tank to replace water,

as water in the pipeline and wet curtain flows back to the water tank.

Set Up

IMPORTANT: Never remove the water tank or open the cover when the unit is ON

and operational

ICE PACKS

The unit comes with 2 x ice packs. Ice packs are used to increase the cooling

capacity. Please place the ice packs in the freezer before use. It takes about 4 hours

to freeze completely - depending on the freezer.

1. Once the ice pack is frozen, open the water tank as instructed on page 10 and

insert the ice packs. Fill the water tank below the maximum mark.

2. Always ensure the unit is OFF before placing or removing the ice pack.