INSTRUCTION MANUAL 7L Evaporative Cooler Model: DCEVP7 For domestic household use only.
IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/ OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully before using your evaporative cooler for the first time and keep them in a safe place. WARNING – This appliance must not be used in a bathroom.
• • • • • • • • • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. To prevent spillage, empty the water tank before lifting or relocating the appliance.
Exposed to the weather outdoors 4 Near water If the power cable wires are frayed or cut Where small children may be left unattended If an extension lead may become overloaded Where the power cable may be damaged On a slope or uneven surface Where there is risk of fire or close to a naked flame Where it may be damaged by chemicals Where there is a risk of interference by foreign objects This product is not made for DIY repair If there is a risk of water falling on the unit
Specification Model no. Colour DCEVP7 White/Black Power supply 220-240V~, 50Hz Rated power 110W Speed settings Modes Turbo air speed 4 4 (natural, normal, sleep & smart) 10m/s Water tank capacity 7L Remote control Y Timer Swing function Controls Max. room size Water consumption Weight (net) Dimensions (w x d x h) 0-8 hours Y Button with LED display 30m² 1.2L/h (high speed) 8kg 346 x 314 x 824mm • For greater precision, please always refer to the rating label placed on the product.
Parts Control panel Display panel Horizontal louvres Remote Water level window Castors Remote control storage Rear filter Water tank Ice pack 6
Display & Control Panels Control Panel Display Panel Remote Control On/Off Mode Left/right swing Timer Speed Cool/Humidfy 7
Functions Note: The buzzer beeps twice when the power supply is first turned on. The unit is in ‘standby’ until the On/Off button is pressed. The horizontal louvres need to be opend manually by hand. ON/OFF Press the ON/OFF button to turn the unit ON. The default settings when first turned on are; medium fan speed, normal mode, and no timer. To turn the unit OFF press this button again. It may take a few seconds to power off completely.
Functions Smart: During smart mode the fan speed can’t adjusted. Instead the fan speed is automatically chosen & adjusted based on temperature changes in the room. When the smart mode is selected the LED indicator will start to flash and begin operation acording to the conditions below: • • • When the ambient room temperature is below 25 degress, the unit will operate at low fan speed.
Other Functions Environmental protection function: If no operation is detected within 60 seconds, all LED’s dim to a semi-bright light. When operation is detected, the LED’s enter full brightness immediately. Water level protection function: When the cooling function is first turned on, the water pump works for 50 seconds. If the low water is detected, then the pump will stop working and a buzzer alarm sounds for 10 seconds.
Operation & Set Up 1. Remove the unit from its packaging 2. To begin using the COOL/HUMIDFY function, open and remove the water tank located at the back of the unit and fill to the MAX fill line. 3. For extra cooling power, place an ice pack (supplied) into the water tank. 4. Open the hoizontal louvres. 5. Plug into a power supply and press the ON/OFF button to start the appliance. 6. The unit will operate initially on a continual basis.
Cleaning Your unit is designed to remove dirt and other atmospheric impurities by drawing air through the air filter. DO NOT block the air filter, as this will impair the efficiency of the unit. Pushing the unit up against a wall or operating it in close proximity to long window drapes will also impair the unit’s air flow and efficiency. Rear Air Filter • This is easily accessible by removing the rear screen and filter.
Maintenance If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Warranty Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relative Customer Care Centre below.
Customer Care: 1300 556 816 customer.care@glendimplex.com.au www.dimplex.com.au Supplied by Glen Dimplex Australia 1340 Ferntree Gully Road, Scoresby, Victoria, 3179 © Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.
