Service manual
14 www.dimplex.com
Example of Mountable Wire Tie
Heater Assembly Connections
“Piggy Back” to
Heater Switch
Fan Motor
Elements
Top and Bottom Ele-
ment Connection
Blower/Fan
Red Wire Connects
Motor to Heater
Elements (comes
already attached)
“Piggy Back” from
Upper Element to
Heater Motor
Connector to Ther-
mostat (White)
Electrical Connections in Heater Housing
Power Cord – comes in though back panel.
Ribbed half of cord goes to the Neutral Connection •
in Yellow Wire Nut.
Smooth half of cord goes to the 3-Position Switch•
1st Wire Nut Whites from:
Thermostat•
Power Cord•
Flicker Motor•
Remote Control Receiver “N” JP3•
Black (Ribbed) from Light Harness•
2nd Wire Nut:
Red from Heater ON/OFF Switch•
Black from Flicker Motor•
Black (Smooth) from Light Harness.•