INSTRUCTION MANUAL LED Tower Fan Model: DCTFE97 For domestic household use only.
IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully before using your fan for the first time and keep them in a safe place. WARNING – This appliance must not be used in a bathroom.
• • • • • • • • • • • • • • leisure applications or in small enclosed spaces. Never use the mains lead as a carrying strap or pulling lead. To avoid a fire or electrocution hazard, NEVER put the cord near heat registers, radiator, stoves or heaters. DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Take care to position the cord away from traffic areas and where it will not be a tripping hazard.
• Always switch off the unit and take the plug out of the socket: • If you are not using the unit • Before you clean or carry out maintenance on the unit • If a fault occurs • In the event of an electrical storm. • Avoid electromagnetic interference. Keep the unit at least 1 metre away from electrical appliances such as televisions & radios.
Exposed to the weather outdoors Near water If the power cable wires are frayed or cut Where small children may be left unattended If an extension lead may become overloaded Where the power cable may be damaged On a slope or uneven surface Where there is risk of fire or close to a naked flame Where it may be damaged by chemicals Where there is a risk of interference by foreign objects This product is not made for DIY repair If there is a risk of water falling on the unit 5
Specification Model no. Colour DCTFE97 Black Power supply 220-240V~, 50-60Hz Rated power 45W Speed settings 3 Modes 4 Timer 0-12 Air volume 1380m³/min Oscillating Y Controls Cord storage Noise level Weight (net) Dimensions (w x d x h) Touch or remote Y 58dB(A) 3.4kg 315 x 315 x 965mm • For greater precision, please always refer to the rating label placed on the product.
Parts Control panel LED Display panel Air outlet Base Remote Remote storage Cord storage 7
Assembly The base of the tower fan comes in two parts, which fit around the oscillation base. Both parts fit easily together. 1. First attach the front half of the base, aligning the holes in the base with the screw hole in the oscillation base and lead the power cord up the base. 2. Connect the back half of the base to the front half and secure with the plastic screw nut (supplied) and twist is clockwise. 3. Plug into an appropriate power supply.
Operation This tower fan can be operated by the control panel or remote control. Please refer to the below diagrams for descriptions.
Operation 1. Place the fan on a flat stable surface. Plug into an electrical outlet and press the “Power On/Off” button to turn the unit “On”. The current room temperature will show on the LED display. 2. Adjust the fan speed by pressing the “Speed” button. There are three speeds Low, Medium & High and each press will cycle through the speed settings. The speed setting will show on the LED display. 3. Press the “Mode” button to cycle through, Normal, Natural, Sleep & Child modes.
Cleaning Over time, dust can accumulate on the fan grille, which can affect the fans performance. It is recommended to clean the fan at least once a month. 1. Turn the unit OFF and disconnect the appliance from the power supply. 2. Remove any dust build up with a soft brush. 3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used for any stubborn marks.
Maintenance If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Warranty Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relative Customer Care Centre below.
Customer Care: 1300 556 816 customer.care@glendimplex.com.au www.dimplex.com.au Supplied by Glen Dimplex Australia 1340 Ferntree Gully Road, Scoresby, Victoria, 3179 © Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.
