DHCER20 2kW Ceramic Heater INSTRUCTION MANUAL PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT. www.dimplex.com.
CONTENTS WARNINGS AND PRECAUTIONS 1 STRUCTURE 3 OPERATION 4 CLEANING AND MAINTENANCE 6 TECHNICAL REFERENCE DATA 7 WARRANTY 7 www.dimplex.com.
WARNINGS & PRECAUTIONS Warnings • Never place the unit near gas appliances, flames or flammable liquids. • Never hit or shake the unit. Doing so may cause damage. • Never cover or obstruct the air inlet or outlet. Doing so may cause overheating. • Never spray water on or place the unit near water. Doing so may cause electric shock. • Never connect other appliances to the same power outlet. • Never connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
WARNINGS & PRECAUTIONS • • • • • • • • • • • • Children should be supervised to ensure they do not play with the appliance. Avoid electromagnetic interference. Keep the unit at least 1 metre away from electric appliances such as televisions and radios. Avoid scratching and damaging the surface. Do not use chemical solvents (i.e. Benzene, alcohol) to clean the surface. Place the unit on a stable surface when operating. Unplug the unit before cleaning, servicing or maintenance.
STRUCTURE 6 1. 2. 3. 4. 5. 6.
OPERATION BEFORE FIRST USE • Please read these instructions carefully before use and keep them for future reference. • Check your local mains voltage is the same as stated on the appliance. • Before using for the first time, remove any protective films or stickers from the appliance and ensure the power switch is in the “OFF” position. Connect the plug to a power supply and switch on the power.
OPERATION OPERATIONAL PANEL Gear knob Temperature adjustment knob TEMPERATURE ADJUSTMENT KNOB • Rotate the temperature adjustment knob to set your desired temperature. • Turn in counterclockwise direction for higher temperatures. • Alternatively, turn clockwise for cooler temperatures. OSCILLATION • Press the oscillation button (refer to above diagram) to enable oscillation. Press again to stop oscillation.
CLEANING & MAINTENANCE CLEANING Ensure the unit is turned off and the plug is disconnected from the power outlet before commencing any cleaning or maintenance. Cleaning the unit’s surface: Clean the surface with a damp cloth (add some mild detergent for stubborn marks). Do not use corrosive detergent or solvents to clean; such as petrol/ turpentine etc. Do not wash the unit directly with water. Cleaning the air filter: Dirt and dust may accumulate in the filter during operation.
TECHNICAL & REFERENCE DATA • If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water, polluting the food chain and damaging health and well-being. MAINTENANCE If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). MODEL NO.
