2kW Ceramic Heater with Wi-Fi Model: DHCER20WIFI INSTRUCTION MANUAL PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT
TABLE OF CONTENTS WARNINGS AND PRECAUTIONS.......................................................1 STRUCTURE ...................................................................................3 OPERATION ....................................................................................4 CLEANING AND MAINTENANCE .......................................................10 TECHNICAL REFERENCE DATA ........................................................12 WARRANTY ..............................................
WARNINGS AND PRECAUTIONS Warnings Never place the unit near gas appliances, flames or flammable liquids. Never hit or shake the unit. Doing so may cause damage. Never cover or obstruct the air inlet or outlet. Doing so may cause overheating. Never spray water on or place the unit near water. Doing so may cause electric shock. Never connect other appliances to the same power outlet. Never connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. Avoid electromagnetic interference. Keep the unit at least 1 metre away from electric appliances such as televisions and radios.
STRUCTURE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
OPERATION DISPLAY PANEL Power indicator Temperature indicator ECO function indicator Timer indicator Wi-Fi indicator Swing indicator Low power indicator High power indicator
CONTROL PANEL REMOTE CONTROL ON/OFF button Timer/Temperature button Low / High Power button Timer/Temperature set button ECO button Swing button
ON / OFF This button is used to switch the unit ON and OFF. TIMER A timer can be set so the unit turns off automatically after a set period. When Pressing the TIMER button once, the ‘h’ indicator will illuminate. Press the ‘+/-’ button to set the timer between 0-12 hours. Each press of the ‘+/-’ button increases/decreases the set time in 1 hour increments. If a time isn’t set within 5 seconds, the unit will exit the timer function and revert to displaying the room temperature.
WI-FI You can operate the unit wirelessly when connected to Wi-Fi. You’ll need a Wi-Fi connection, and mobile device with the Dimplex CONNECT IT app installed. 1. Connect mobile device to Wi-Fi and download the Dimplex CONNECT IT app from the App Store, or Google Play. 2. Once installed, launch the app. 3. Press and hold the Wi-Fi button at the back of the unit (8) until the Wi-Fi indicator light flashes rapidly 4. Click ‘Add the new device’. The SSID should automatically pick up the Wi-Fi connection name.
You can update the device name & password by following the steps below: Step 1 Step 2 Step 3 Step 4 The connected For Android – press Rename the above The new device device appears in the & hold the model fields to desired name will appear in home screen. You number to edit. name / password the top left hand can change the For iPhone – swipe and submit. corner in the control model name & left on the model update the password until you see the from this screen. above change.
REMOTE CONTROL The remote control can be used to operate all functions. 1. Remove the battery cover at the back of remote control (Picture 2). 2. Insert the battery (included) [Picture 3]. 3. Replace the battery cover. Operation 1. Connect the unit to a power supply and switch on. 2. The unit will be in standby mode and sound a ‘beep beep’ once connected to the power supply. The ON/OFF indicator light will illuminate. 3. Press the ON/OFF button to turn the unit ON. 4.
time is ready to be set. Time is set in 1 hour increments, and can be set up to 12 hours. Press the ‘+/-’ buttons to set the desired time. 8. Press the timer/temperature set button twice to set the temperature. The numbers will flash on the LED display when the temperature is ready to be set. The temperature can be set between 5-35°C. Press the ‘+/-’ buttons to set the desired time. 9. Press the SWING button to activate oscillation mode. Press again to deactivate this mode. 10.
IMPORTANT The control panel must not come into contact with water or any other liquids. Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water, polluting the food chain and damaging health and well-being.
TECHNICAL REFERENCE DATA Model DHCER20WIFI Rated Power 2000W Voltage/Frequency 220-240V/50Hz Net Weight 2.36kg Dimensions HxWxD Body (mm) 564 x 233 x 199 WARRANTY The warranty period is 12 months from the date of purchase. For service advice, please contact the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ).
