Installation Sheet

14 www.dimplex.com
Installation
Suspension Mounting
Suspension mounting is an option for lowering the heater from high ceilings. If the ceiling height is more than 105"
(2.7m), it is recommended to lower the heaters to an ideal mounting height of 96" to 105" (2.4m to 2.7m).
Suspension can be done with chains or wires (ensure the wire/chain has a suitable load rating for the heater).
The wire or chain is connected to the lower part of the standard brackets (Figure 13). The brackets need to be
mounted onto a secure frame or wall with a minimum distance between the two brackets (Figure 9, page 12). When
completing the installation, ensure all screws are tight and unit is secure.
!
NOTE: Chains or cables are not supplied with the heater, and are not available as optional accessories. Ensure
materials used are suitable for this application.
Figure 13