Installation Sheet
Table Of Contents
18 www.dimplex.com
Troubleshooting
Problem Cause Solution
No heat No power to the unit
Check that power is on at the switch
and at the breaker.
Inspect cable for damage.
Heater does not get sufciently hot
Heater has not nished warming up
Normal operation - wait 15 minutes
for the heater to reach its maximum
temperature.
Insufcient power
Ensure the unit is wired with the
correct voltage.
If there are multiple heaters on one
circuit, ensure they are wired in
parallel, not in series.
Discoloration of the heater housing
Heater is overheating
Ensure the unit is wired with the
correct voltage.
Environmental factors
Perform cleaning procedure more
frequently. See Maintenance section.
Normal wear and tear
Paint the face of the unit using a
600° high temperature engine paint.
This is available for purchase at
automotive stores.
WARNING: There are no user serviceable parts inside the heater any servicing other than cleaning of
the heater should be performed by an authorized service representative.