Installation Guide
10 www.dimplex.com
HEATER ASSEMBLY REPLACEMENT
WARNING: If the stove was operating prior to servic-
ing, allow at least 10 minutes for light bulbs and heating
elements to cool off to avoid accidental burning of skin.
WARNING: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
Gently place stove on it’s back on a at surface.1.
Remove the heater cover retaining screws located on 2.
the bottom of the stove and lower heater/light assembly
onto the oor.
Remove the reector rod and motor assembly by 3.
removing the screws on the front and rear of the heater
cover.
Disconnect the heater wiring connections from the 4.
heater noting their original locations.
Remove the 4 heater mounting screws and remove the 5.
heater from the unit.
Reassemble in the reverse order as above.6.