User Guide

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 11
Icon Function Description
Disable Heat Press the Heat and Temp buttons on the unit at
the same time and hold for 2 second to disable
the heater. Press and hold again for 2 seconds
to enable the heater.
When the heater is disabled, "--" will display
when Temp button is pressed. The remainder
of the unit's controls will operate in the same
fashion.
o
C /
o
F Temp The display can show the temperature reading
in either
o
C or
o
F. To change the display, press
and hold the Temp and Flame Speeds buttons
on the unit.
D
Flame Speed Press multiple times to toggle through flame
speeds (minimum, medium, maximum). Display
will show current speed number (F1, F2, F3
respectively).
E
Color Themes Press multiple times to change the media and
flame base colors. This feature is active only
when the flame effect is On. Display will show
theme (t0, t1, t2, etc.)
XHD28L, XHD26L or XHD23L (Log Unit) themes:
• Theme t0 - no flame
• Theme t1 - Natural (flame base off)
• Theme t2 - Red Highlights (flame base red/
orange flickering)
• Theme t3 - Blue Highlights (flame base blue
flickering). .
XHD28G, XHD26G or XHD23G (Media Unit) themes:
• Theme t0 - Midnight Mode
• Theme t1 - Media White
• Theme t2 - Media red/orange flickering
• Theme t3 - Media blue flickering.
• Theme t4 - Media Purple
• Theme t5 - Media Green
• Theme to - Prism Mode (To choose a custom
color, press Brightness icon. Press again to
return to Prism Mode.)
Operation