Subject to colour deviations and technical modifications without notice: AU 05/12.2 · Art. no. 763v2 Product Range Overview 2012 Product Range Overview 2012 Renewable Energies Heat Pumps Solar Thermal Systems Domestic Heating Products 2012 Visit www.dimplex.de and www.heating-with-heatpump.com for further up-to-date information Heat Pumps Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach, Germany Phone: +49 9221 709-201 Fax: +49 9221 709-233 09221709233@dimplex.de www.
Contents Air-to-water heat pump for outdoor installation High-efficiency air-to-water heat pump package solution...................................................................................................................... 4 High-efficiency air-to-water heat pump ......................................................................................................................................................... 5 Air-to-water heat pump package solution ...........................................
Air-to-water heat pump for outdoor installation High-efficiency air-to-water heat pump package solution Heating and domestic hot water preparation package Max. flow temperature 60 °C Casing colour White aluminium (similar to RAL 9006) Heat pump and HWK 332 Econ-E Hydro Tower HPL 6TUW The Hydro Tower with integrated WPM EconPlus regulation enables the fast and simple connection of a high-efficiency air-to-water heat pump installed outdoors to a heating system with an unmixed heating circuit.
Air-to-water heat pump for outdoor installation High-efficiency air-to-water heat pump High-efficiency air-to-water heat pump Max. flow temperature 60 °C Casing colour White aluminium (similar to RAL 9006) For installation close to walls LA 6TU Heat pump for heating purposes for outdoor installation with wall-mounted WPM EconPlus heat pump manager.
Air-to-water heat pump for outdoor installation High-efficiency air-to-water heat pump High-efficiency air-to-water heat pump Max. flow temperature 58 °C Casing colour White aluminium (similar to RAL 9006) With two performance levels LA 17TU Heat pump for heating purposes for outdoor installation, with wall-mounted WPM EconPlus heat pump manager and two compressors for output reduction when operating at partial load.
Air-to-water heat pump for outdoor installation Electric connection line heat pump – heat pump manager Essential accessory for heat pumps with electronic expansion valve Three separate control lines between the WPM EconPlus heat pump manager and the high-efficiency air-to-water heat pump with electronic expansion valve for outdoor installation.
Air-to-water heat pump for outdoor installation Reversible high-efficiency air-to-water heat pump Max. flow temperature 60 °C Flow temperature cooling min. 9 °C Casing colour White aluminium (similar to RAL 9006) Optimised for heating and cooling LA 35TUR+ Heat pump for heating and cooling purposes for outdoor installation with wall-mounted heat pump manager and two compressors for output reduction when operating at partial load.
Air-to-water heat pump for outdoor installation Air-to-water heat pump package solution Heating package Heat pump and HPK 200S hydraulic tower HPL ... The hydraulic tower (W = 680 mm; H = 1660; D = 775) with integrated WPM 2006 plus controller facilitates quick and easy connection of an air-to-water heat pump installed outdoors to a heating system with an unmixed heating circuit.
Air-to-water heat pump for outdoor installation Low temperature air-to-water heat pump Low temperature air-to-water heat pump Max. flow temperature 55 °C Casing colour White aluminium (similar to RAL 9006) For installation close to walls LA 11MAS Air-to-water heat pump for outdoor installation with external temperature controlled WPM 2006 plus heat pump manager. Sound-optimised through the use of low-noise ‚owl‘s wings‘ ventilator blades. Energy-efficient defrosting by reverse circulation.
Air-to-water heat pump for outdoor installation Reversible air-to-water heat pump Optimised for heating operation with waste heat recovery LA 11ASR Max. flow temperature 58 °C Flow temperature cooling min. 7 °C Casing colour White aluminium (similar to RAL 9006) Air-to-water heat pump for outdoor installation with external temperature controlled WPM 2006 R heat pump manager and reversible refrigeration circuit for heating and cooling.
Air-to-water heat pump for outdoor installation Medium temperature air-to-water heat pump Max. flow temperature 65 °C Casing colour White aluminium (similar to RAL 9006) With two performance levels LA 17PS LA 14PMS Medium temperature air-to-water heat pump for outdoor installation with external temperature controlled WPM 2006 plus heat pump manager and two compressors for flexible output adjustment.
Air-to-water heat pump for outdoor installation Special accessories for air-to-water heat pumps for outdoor installation Electric connection line heat pump – heat pump manager Control line between the heat pump manager and the air-to-water heat pump for outdoor installation. Wired ready for use and with coded plug connections at both ends for installation in a protective tube (minimum diameter 70 mm, non-confusable: round plug for connection to the heat pump). EVL ... Order reference Art.-no.
Air-to-water heat pump for outdoor installation Connection heat pump - heating water connection line Optimised for connection to a heat pump VSF .. Flexible hose connection set, length 250 mm, for fast and simple connection of an air-to-water heat pump (installed outdoors) to a heating water connection line laid under the ground. Consists of two insulated stainless steel Wellflex pipes with cap nuts and screw connections. Order reference Art.-no.
Air-to-water heat pump for outdoor installation Air-to-water heat pump in split design Air-to-water heat pump in split design LIA 7-9IM Max. flow temperature 55 °C Casing colour White Heat pump for heating with hydraulic unit (indoor) – and an outdoor unit, which are connected via a refrigerant pipe (special accessory). The outdoor unit with an output-regulated compressor (inverter) adapts the heat output to the heat consumption of the building and can be installed close to walls.
Air-to-water heat pump for outdoor installation Air-to-water swimming pool heat pump Air-to-water swimming pool heat pump Casing colour White aluminium (similar to RAL 9006) With titanium heat exchanger Air-to-water heat pump for outdoor installation for heating swimming pool water.
Air-to-water heat pump for indoor installation High-efficiency air-to-water heat pump High-efficiency air-to-water heat pump Max. flow temperature 60 °C Casing colour White (similar to RAL 9003) With variable air circuit LI 12TU Heat pump for heating purposes for indoor installation with integrated WPM EconPlus. Sound-optimised through the use of slow-running EC 3D radial fans, an encapsulated compressor housing and a free-swinging compressor baseplate for solid-borne sound insulation.
Air-to-water heat pump for indoor installation Air-to-water heat pump with 90° air deflection Low temperature air-to-water heat pump Max. flow temperature 60 °C Casing colour White (similar to RAL 9003) Compact design LIK 8TES Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Air-to-water heat pump for indoor installation Medium temperature air-to-water heat pump Max. flow temperature 65 °C Casing colour White (similar to RAL 9003) Compact design LIKI 14TE Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Air-to-water heat pump for indoor installation Built-under buffer tank Nominal capacity 140 l; in air-to-water heat pump design to enable space-saving installation on top of the built-under buffer; polyurethane insulation with minimal downtime losses (can be used for heating and cooling), incl. 2½“ sleeves for immersion heaters (up to CTHK 636); 1“ heating water connections; colour: white; brown red design screen. PSP 140E Order reference Art.-no.
Air-to-water heat pump for indoor installation Special accessories for air-to-water heat pumps installed indoors Air duct Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site.
Air-to-water heat pump for indoor installation Air duct with sound damping Plug-in system for easy transport Air duct optimally suited for air circuits of air-to-water heat pumps installed indoors; plug-in system consisting of 4 GFRC side panels with thermal insulation and sound insulation on the inside to prevent the formation of condensate and considerably reduce sound transmission (sound insulation factor ~1 dB(A) per running metre, bend ~3 db(A)).
Air-to-water heat pump for indoor installation Heat pump rain guard Rain guard for air-to-water heat pumps for protection against driving rain, with low pressure drop of approx. 5 Pa; the permissible overall pressure drop is not exceeded in case of standard integration with the air hose kit and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey white (RAL 9002). RSG 500 Order reference Art.-no.
Heat pump for heating purposes - ground as heat source High-efficiency brine-to-water heat pump High-efficiency brine-to-water heat pump Max. flow temperature 62 °C Casing colour White (similar to RAL 9003) Universal design with solid-borne sound insulation SI 11TU Heat pump for heating purposes for indoor installation with integrated WPM EconPlus. Variable connection options for brine and heating connections on the back board of the casing.
Heat pump for heating purposes - ground as heat source High-efficiency brine package for brine-to-water heat pump With electronically controlled brine circulating pump High-efficiency brine circuit accessory package consisting of a pre-assembled connection module (expansion vessel connection, quickvent valve, 2.
Heat pump for heating purposes - ground as heat source Package solution for compact brine-to-water heat pumps Heating and domestic hot water preparation package Max. flow temperature 58 °C Casing colour White (similar to RAL 9003) Heat pump and WWSP 229E built-under domestic hot water cylinder HPK ..TEW Consists of compact brine-to-water heat pump, WWSP 229E built-under domestic hot water cylinder and connection kit for quick and easy connection of the individual components to the heating system.
Heat pump for heating purposes - ground as heat source Passive cooling station for WPM EconPlus Passive cooling station Module for passive cooling via borehole heat exchangers. Consists of heat exchanger, brine circulating pump, temperature sensor, passive cooling controller and included 3-way distribution valve (DN 25) with electrothermal actuator. Cooling operating mode is added to the existing heat pump manager by an electronic connection between the heating and cooling controller.
Heat pump for heating purposes - ground as heat source Brine-to-water heat pump in a compact design Low temperature brine-to-water heat pump Max. flow temperature 58 °C Casing colour White (similar to RAL 9003) Compact design SIK 7TE Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Heat pump for heating purposes - ground as heat source Design built-under domestic hot water cylinder Nominal capacity 227 l, in brine-to-water heat pump design to enable space-saving installation on the built-under domestic hot water cylinder, bare-tube heat exchanger (internal), steel cylinder (special inside enamelling) with protection anode, polyurethane insulation with minimum standby losses; integrated temperature sensor for connection to the heat pump manager, colour: white, brown red design screen.
Heat pump for heating purposes - ground as heat source Brine-to-water heat pump in universal design Low temperature brine-to-water heat pump Max. flow temperature 58 °C Casing colour White (similar to RAL 9003) Universal design SI 5ME Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Heat pump for heating purposes - ground as heat source Design built-under buffer tank Nominal capacity 100 l; in brine-to-water heat pump design to enable space-saving installation on top of the built-under buffer tank; polyurethane insulation for minimal downtime losses (can be used for heating and cooling); 1½“ sleeves for immersion heaters (up to CTHK 635); 1¼“ heating water connections; colour: white; brown red design screen. PSP 100E Order reference Art.-no.
Heat pump for heating purposes - ground as heat source Low temperature brine-to-water heat pump Max. flow temperature 58 °C Casing colour White (similar to RAL 9003) Universal design with two performance levels SI 24-37TE Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Heat pump for heating purposes - ground as heat source High temperature brine-to-water heat pumps Max. flow temperature 70 °C Casing colour White (similar to RAL 9003) Universal design with two performance levels SIH 20TE Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
Heat pump for heating purposes - ground as heat source Special accessories for brine-to-water heat pumps Connection package brine circuit manifold The AP SVT connection package makes the connection of a maximum of 8 circuits possible. The AP SVT 16 connection package makes the connection of a maximum of 2 x 8 circuits possible using a T joint. AP SVT Order reference Art.-no.
Heat pump for heating purposes - water as heat source High-efficiency water-to-water heat pump High-efficiency water-to-water heat pump Max. flow temperature 62 °C Casing colour White (similar to RAL 9003) with stainless steel coil heat exchanger WI 14TU + PSP 100 E Heat pump for heating purposes for indoor installation with integrated WPM EconPlus. Variable connection options for the ground water and heating connections on the back board of the casing.
Heat pump for heating purposes - water as heat source High-efficiency water-to-water heat pump Max. flow temperature 58 °C Casing colour White (similar to RAL 9003) With two performance levels WI 50TU WI 100TU Water-to-water heat pump for indoor installation with integrated WPM EconPlus regulation and two compressors for output reduction when operating at partial load. Variable connection options for the water and heating connections on the back board of the casing.
Heat pump for heating purposes - water as heat source Brine-to-water heat pump – Groundwater heat source package Low temperature brine-to-water heat pump package Max. flow temperature 60 °C Casing colour White (similar to RAL 9003) Using ground water as a heat source The package solution for indirect use of water as a heat source with intermediate heat exchanger and brine-to-water heat pump (intermediate circuit with monoethylene glycol).
Heat pump for heating purposes - water as heat source Special accessories for water heat source Stainless steel plate heat exchanger Use of water heat source in the event of contamination Screwed stainless steel plate heat exchanger. Max. operating pressure 10 bar, max. temperature 80 °C. Intermediate heat exchanger for polluted heat sources or heat sources with poor water quality. Connections for the cold and warm side with external thread (exception: WTE 130 - connection flange with rubber bushing).
Heating and cooling - ground/ground water as heat source Passive cooling with brine-to-water or water-to-water heat pumps Passive cooling station with cooling controller Module for passive cooling via borehole heat exchangers. Consists of heat exchanger, brine circulating pump, temperature sensor, passive cooling controller, 3-way distribution valve with electrothermal actuator included.
Heating and cooling - ground/ground water as heat source Active cooling with brine-to-water heat pump Reversible brine-to-water heat pump Max. flow temperature 58 °C Flow temperature cooling min. 7 °C Casing colour White (similar to RAL 9003) Optimised for cooling operation SI 11MER Heat pump for heating and cooling with integrated regulation installed indoors. Variable connection options for brine and heating connections on the back board of the casing.
Heating and cooling - ground/ground water as heat source Reversible brine-to-water heat pump Optimised for heating and cooling with waste heat recovery SI 130TUR+ Max. flow temperature 58 °C Flow temperature cooling min. 7 °C Casing colour White (similar to RAL 9003) Heat pump for heating and cooling with integrated regulation installed indoors. Variable connection options for brine and heating connections on the back board of the casing.
Accessories for heat pumps for heating purposes Buffer tanks and accessories Built-under buffer tank Order reference PSP 100E Art.-no.
Accessories for heat pumps for heating purposes Floor-mounted buffer tank, solar Nominal capacity 1000 litres, including six 1½“ sleeves for immersion heaters (up to CTHK 636), 3 m² solar heat exchanger (for a solar collector area of up to 16 m2), three ½“ immersion sleeves for temperature sensors, 2½“ heating water connections and 3 supporting feet.
Accessories for heat pumps for heating purposes Domestic hot water cylinders and accessories Domestic hot water cylinder with foil cladding and temperature sensor Steel cylinder (special inside enamelling) with protection anode and 3 supporting feet, polyurethane insulation with minimal standby losses, temperature sensor for connection to the heat pump manager included in the scope of supply, colour white, heating connection 1¼“, domestic hot water connection 1“ external thread, circulation connection ¾“.
Accessories for heat pumps for heating purposes Design domestic hot water cylinder Nominal capacity 400 l, in brine-to-water heat pump design, bare-tube heat exchanger (internal), three supporting feet, steel cylinder (special inside enamelling) with protection anode, polyurethane insulation with minimal standby losses (approx. 2.7 kWh/24 h), integrated temperature sensor for connection to the heat pump manager, colour white, brown red design screen. Order reference Art.-no.
Accessories for heat pumps for heating purposes Hydro Tower/combination tank Hydro Tower with external heat pump manager Compact installation for heating and domestic hot water preparation HWK 332 The Hydro Tower enables the fast and simple connection of a heat pump for heating purposes to a heating system with an unmixed heating circuit. The heat pump manager included in the scope of supply of the heat pump is used for the electronic control of the components (external wiring required).
Accessories for heat pumps for heating purposes Heat pump/solar combo tank Combo tank for integrating solar energy Domestic hot water heating in flow principle PWD 750 Upright cylinder for heating and domestic hot water preparation with central flow, with three internally tin-plated heat exchangers (external pipework necessary); consisting of a buffer tank for heating and a buffer tank for domestic hot water; heating buffer tank used as a preheating stage for domestic hot water preparation.
Accessories for heat pumps for heating purposes Reversing valve for PWD combo tank Three-way reversing valve for switching from heating to domestic hot water preparation in the flow or return. Motor operated for short switching times (set time open 12 s, set time closed 6 s); for a maximum volume flow of 2 m³/h; max. differential pressure 0.6 bar; temperature operating range for heating water 5–88 °C; max. ambient temperature 50 °C. Order reference Art.-no.
Accessories for heat pumps for heating purposes Main heat pump circuit Compact manifold with overflow valve Pump inside micrometer 180 mm KPV with UP 60 EB KPV Compact manifold Combinable module with insulation jackets for installation-friendly connection of the heat pump, buffer tank, domestic hot water cylinder and heat distribution system.
Accessories for heat pumps for heating purposes Distribution system for heat pumps Heating distribution system modules Pump inside micrometer 180 mm WWM 25 with UP .. MMH 25 with UP .. Unmixed heating circuit module Combinable module with insulation jackets for connection of an unmixed heating circuit or domestic hot water or swimming pool water preparation system. Can be used for a heating water flow of up to 2.5 m3/h (WWM 25) or 7.5 m3/h (WWM 50).
Accessories for heat pumps for heating purposes Domestic hot water pump unit Pump unit for direct mounting of the domestic hot water loading pump on the rear of the domestic hot water cylinder (pump not included in the scope of supply). Consists of: Elbow union with manual breather, installation option for a circulating pump with two ball valves and gravity control. Extra WPG 32: 1¼“ elbow union with drainage for domestic hot water return. Order reference Art.-no.
Accessories for heat pumps for heating purposes Dirt trap Dirt trap for installation into the heating circuit (return to the heat pump), suitable for all non-corrosive substances up to 150 °C. To protect the heat pump against damage caused by impurities and thus extend its service life. SMF .. Order reference Art.-no.
Accessories for heat pumps for heating purposes Heat pump regulation and accessories Heating controller - heat pump manager Controller for heat pump heating systems for installation in frost-free rooms, with backlit LCD, time-controlled lowering and raising of the heating characteristic curve, timer functions for domestic hot water preparation according to need by heat pump, with optional targeted reheating by flange heater.
Accessories for heat pumps for heating purposes Reference room regulation Smart RTC (Room Temperature Controller) The reference room controller measures the temperature difference between the actual room temperature and the set temperature, and communicates this to the heat pump manager. The return set temperature is calculated on the basis of this difference. The ~230 V voltage supply (2-core) and the bus cable (2-core, screened) must be provided by the customer.
Accessories for heat pumps for heating purposes Special accessories for WPM 2006 heat pump managers Order reference Art.-no. Features For connection to the wall-mounted WPM 2006 plus heat pump manager with integrated display.
Accessories for heat pumps for heating purposes Special accessories cooling regulation Room climate station for temperature and humidity measurement This accessory is essential for silent cooling using panel heating/cooling systems. Connection to a cooling controller to control the flow temperature based on the measured room temperature and humidity in a reference room. RKS WPM Order reference Art.-no.
Fan convectors SmartRad fan convectors Fan convectors heating Casing colour white (similar to RAL 9010) Connection voltage 1/N/PE ~230 V, 50 Hz SmartRad Wall-mounted Smart Rad fan convector with integrated electronic thermostat. Manual and automatic operation, maximum fan level can be preset; automatic regulation of the 3 fan levels according to heat consumption. Water connection can be on the left or right. The convectors can be used from a flow temperature of min.
Heat pump - air/waste heat as heat source Domestic hot water heat pump – heat source indoor air/cellar air/outside air Domestic hot water heat pump Domestic hot water temperature up to max. 60 °C Lower operating limit heat source (heating operation) 8 °C Upper operating limit heat source (heating operation) 45 °C Additional heat exchanger with solar function Heat pump for domestic water heating, with LCD and extensive control functions (e. g.
Heat pump - air/waste heat as heat source Domestic hot water heat pump with foil cladding Air duct connection and additional heat exchanger Domestic hot water temperature up to max.
Heat pump - air/waste heat as heat source Heat pump module – heat source indoor air Air-to-water heat pump Max. flow temperature 65 °C For utilisation of waste heat A heat pump module for utilisation of waste heat; integrated radial fan, exhaust air and extract air stubs for optional connection of a duct system DN 160 (maximum pipe length 10 m), infinitely variable return set temperature.
Solar collectors and accessories Solar collector High-performance flat plate collector for mounting onto roofs and flat roofs or for free-standing installation, laser-welded full surface absorber with highly-selective coating. Collector for universal use can be used for large surface areas as well as for single mounting. The connections make fast and hydraulically safe mounting possible. The system is operated with pre-mixed SOLHT 20 solar fluid, providing the required frost protection.
Solar collectors and accessories Assembly accessories solar collector SOLC 220 Mounting kit for roof mounting (pantiled roof, plain tile, corrugated sheet) and free-standing installation of SOLC 220 solar collectors. Consists of the basic set for the first collector and an extension set for each additional collector. The sets include profile rails and stop anchors for collector mounting onto the respective type of roof as well as components for the hydraulic integration. Order reference Art.-no.
Solar collectors and accessories Solar accessories Order reference Art.-no. Short text Features SOLFH 15 356320 Connection kit Pre-insulated pipe system for connecting solar collectors to the domestic hot water cylinder and the solar station. The system consists of two stainless steel corrugated tubes DN 16 each 15 m long with an integrated sensor lead. The foil cladding serves as protection against mechanical stress and UV radiation.
Solar collectors and accessories Solar domestic hot water cylinders Solar domestic hot water cylinders For heat pumps Solar domestic hot water cylinder made of steel (special inside enamelling) with protection anode, two integrated bare-tube heat exchangers for solar and heating. Thanks to the temperature stratification, even small solar gains are sufficient to feed energy into the lower cold water section of the cylinder. The upper part of the cylinder is kept at the comfort temperature.
Solar collectors and accessories Solar package with 2 collectors Solar package with 2 collectors for domestic hot water preparation for a household of 2–4 people. • 2 x SOLCU 180 solar controller • 1 x SOLCU 1 solar controller • 1 x SOLPU S solar station • 1 x SOLHT 20 heat transfer fluid • 1 x SOLVK 1 expansion vessel connection • 1 x basic set for collector installation • 1 x SOLEV 12 expansion vessel • 1 x expansion set for collector installation Order reference SOLP 2 ... Art.-no.
Solar package for supplementary heating and domestic hot water preparation Solar package with 5 collectors Solar package with 5 collectors for domestic hot water preparation and supplementary heating. • 5 x SOLC 220 solar collector • 1 x SOLCU 1 solar controller • 1 x SOLPU V solar station • 2 x SOLHT 20 heat transfer fluid • 1 x SOLVK 1 expansion vessel connection • 1 x basic set for collector installation • 1 x SOLEV 35 expansion vessel • 4 x expansion set for installation SOLP 5 ...
Contents Storage heaters Dimplex storage heaters .....................................................................................................................................................................................................................68 PERMATHERM® storage heaters ........................................................................................................................................................................................................72 Accessories ...
Storage heaters Dimplex storage heaters ThermComfort duo-electronic storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Compact design VFDi ...C • Digital electronic duo charge controller with 2 control inputs for optional connection to DC charge controls (0.91–1.
Storage heaters ThermoComfort storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Compact design VFMi ...
Storage heaters ThermComfort duo-electronic storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Flat design FSD ...C • With wall bracket for mounting on load-bearing brickwork included as standard • Digital electronic duo charge controller with 2 control inputs for optional connection to DC charge controls (0.91–1.
Storage heaters ThermComfort duo-electronic storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Low series storage heaters VNDi ... C • Digital electronic duo charge controller with 2 control inputs for optional connection to DC charge controls (0.91–1.
Storage heaters ThermComfort duo-electronic storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Kitchen design • Can be integrated, mounted under a worktop or covered with solid kitchen panelling • Digital electronic duo charge controller with 2 control inputs for optional connection to DC charge controls (0.91–1.
Storage heaters PERMATHERM® storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Flat design Optima • Storage heater in flat design • High-grade hard-shell core thermal insulation made of natural vermiculite combined with Microtherm® • Dynamic discharge • Thermomechanical AC charge controller • AC control system ~230 V, 80% operating time ESF ... K Order reference Art.-no.
Storage heaters PERMATHERM® storage heaters Connection voltage 1/N/PE ~230 V, 50 Hz Two-circuit design in flat design Optima ESFZ ...
Storage heaters PERMATHERM® storage heaters Connection voltage 3/N/PE ~400 V, 50 Hz Kitchen design can be integrated • Kitchen design can be covered with solid kitchen panelling • High-grade hard-shell core thermal insulation made of natural vermiculite combined with Microtherm® • Dynamic discharge • Thermomechanical AC charge controller • AC control system ~230 V, 80% operating time • Built-in room temperature controller Order reference ESK ... K with EZK ES Art.-no.
Storage heaters Integrated room temperature controller Order reference RTID 31/RTED 30 Art.-no.
Storage heaters Floor bracket For wall/floor mounting if the brickwork cannot bear loads and for free-standing installation. Painted profile bracket with unscrewable ground support and fixing accessories. 10.4 cm ground clearance (package content: set = 2 items) Order reference Art.-no. For device type Casing colour WKO 18 324470 FSD 12C - FSD 48C Birch grey EZ KK F IC251133 ESF 12.. K - ESF 48..
Storage heaters Water-proofing kit Enables installation of storage heaters according to VDE regulations. Do not use in combination with special accessories for the integrated room temperature controller. Degree of protection IPX4 (splash water protection). WS 25 i Order reference Art.-no.
Storage heaters Components for storage heaters Electronic charge controllers Order reference Art.-no. Features LRD 2000 plus 338830 Digital electronic DC/AC charge controller with two control inputs for ThermoComfort duo-electronic VFDi..(C), VFD.., FSD..(C), VNDi..(C), VTDi..(C), and VKD.. storage heaters, optional connection to a DC charge control (0.91–1.
Direct heating appliances Radiant panel heater FPE series Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 20 Protection class l Horizontal design Wall mounting using wall bracket, connection cable for fixed connection, high-quality metal casing, aluminium surface heating element, electronic infinitely variable room thermostat, protection against overheating, function switch for ON/OFF/Frost protection/Lower. Lowering can be centrally regulated using an external control e. g. timer.
Direct heating appliances Design wall convector GFP series Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP X4 Protection class l Design convector with precise electronic room temperature regulation, frost protection setting, connecting lead for fixed connection, high-grade metal casing with easy-care glass front, ON/OFF switch, temperature lowering using an RMT 2 programming module or external control of the control line possible, e. g. using a timer, switch etc.
Direct heating appliances Wall convectors EPX series Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP X4 Protection class l Electronically regulated Precise infinitely variable electronic room temperature regulation, frost protection setting, connection cable for fixed connection, ON/ OFF switch, temperature lowering using an RX programming module or external control of the control line e. g. timer or switch possible.
Direct heating appliances Wall convectors DXW series Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 20 Protection class l Infinitely variable thermostat with frost protection function, fold-down wall bracket, sheet-steel casing, connection cable for fixed connection, protection against overheating, indicator lamp for heating operation, ON/OFF switch, 2 heating levels, (DXW 315 to DXW 330). Order reference Art.-no. Rated power W Width x Height x Depth mm Weight kg 577 x 367 x 124 4.
Direct heating appliances Towel dryer/rapid heater for bathrooms TRFB Connection voltage 1/N ~230 V, 50 Hz Degree of protection IP 24 Protection class ll Combination of radiant panel heater, towel dryer and rapid heater for bathrooms, electronic room thermostat, electronic timer for ventilation operation 0.5 h/1.0 h/2.
Direct heating appliances Wall convectors Unique Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 21 Protection class l To be mounted using a wall bracket with outlet for fixed connection, electronic thermostat, lowering using control line or radio module, high-quality aluminium finned heating element, powder-coated casing, colour white similar to RAL 9010, ON/OFF switch. Order reference 2NC8 082 4F Art.-no.
Industrial heaters Industrial fan heater IHP series Degree of protection IP 24 Protection class l Portable Fan heater in metal design with carrying handle for portable use. Controls integrated directly in the device, room temperature controller with frost protection setting, wall mounting using the included wall bracket (for heights that are difficult to reach). Casing colour blue, air outlet grid black. IHP 30 Order reference Art.-no.
Hot-air curtain Air curtains AC…N Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 20 Protection class l Electric operation Mounting above doors or on ceilings, adjustable air outlet direction, 2 heating levels, 1 cold air level. Operated either on the device or with a remote control (only AC 3RN). For door widths from 600 mm (AC 3 and AC 45) to 900 mm (AC 6). Width x Height x Depth mm Weight kg Order reference Art.-no. Rated power W Air volume flow m³/h Max.
Hot-air curtain Air barrier DAB series Connection voltage 1/N/PE ~230 V, 50 Hz Protection class l hot water operation DAB 10 W V2 Hot water operation, mounting above doors, on ceilings or hidden (optional installation kit needed), modular design allows simple placing of devices in a row, mounting height up to 4.0 m, adjustable direction of flow, 2 fan levels, controllable using wall-mounted low-voltage control or by connecting to a building management system.
AKO direct heating appliances Radiant panel heaters WW... series Connection voltage 1/N ~230 V, 50 Hz Degree of protection IP 24 Protection class ll Radiant panel heater with electronic thermostat, free-standing installation, on rollers (not WW 101 E) or wall-mounted, metal heating plate, frost protection function, protection against overheating and indicator lamp for heating operation, colour white, splash water protection IP24, BEAB Intertek certification. WW 101 E Order reference Art.-no.
AKO direct heating appliances Infrared heater (compact range) Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 24 Protection class l Infrared heaters (compact range) with quartz heating elements for horizontal wall mounting, controlled via a pull switch on the device, pivoting angle 0–40°, fixed connection, VDE certification. Order reference Art.-no.
AKO direct heating appliances Infrared terrace heater Order reference Art.-no. BA 1200 BA 1900 BA 1200 BA 1900 354870 354880 1200 BA 1900 Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP X4 Protection class l Rated power W 1200 1900 354870 354880 Features Number of heating elements Unit(s) Width x Height x Depth mm 2 Infrared heater with two quartz heating elements, robust aluminium casing, protective grid, for horizontal wall mounting, fixed connection, connecting lead 1.
AKO direct heating appliances Rapid heater Order reference SH 302 TLU SH 300 T AKO151156 SH 301 TLS AKO151151 Rated power W 2000 Width x Height x Weight kg Depth mm Wall-mounted or free-standing rapid heater with axial fan, carrying handle/recess, cable compartment, thermostat, frost protection, cold air level, indicator lamp, five control levels OFF/Cold/0.8/1.2/2.0 kW, colour blue grey. AKO151146 AKO151156 AKO151151 AKO151146 H 390 TS 240 x 340 x 185 1.
AKO direct heating appliances Components for AKO direct heating appliances Heating elements for infrared heaters QHS 600BS A Order reference Art.-no. Heat output kW For device type HHE 1900BA 365290 1.9 BA 1900 QHE 600BA 365280 0.6 BA 1200 QHE 600BS N 365300 0.6 BS 1201 S BS 1801 S BS 1801 W QHS 600BS A 105125 0.6 BS 1200/1 BS 1800 BS 510 S / BS 510 W BS 600 QHS 1200BK 105251 1.2 BK 2001 S / BK 1201 S BK 2000/1 W BK 2000/1 S BK 2000 QHS 800BK 105252 0.
Underfloor heating systems Thin mortar bed heating mats HM … SF Connection voltage 1/N/PE ~230 V, 50 Hz To be installed directly in the tile adhesive or the levelling Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch, heating conductor made of resistance alloy according to DIN 17470 and DIN 17471 with Teflon insulation, surface-related consumption 150 W/m², additional installation height approx.
Underfloor heating systems Thin mortar bed heating mat set HM…TS set BTU Connection voltage 1/N/PE ~230 V, 50 Hz With floor temperature controller BTU 401 UN HM ... TS set BTU Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch, heating conductor made of resistance alloy according to DIN 17470 and DIN 17471 with Teflon insulation, surface-related consumption 150 W/m², heating conductor diameter approx.
Underfloor heating systems Underfloor heating mat HM … R Connection voltage 1/N ~230 V, 50 Hz For use as underfloor direct heating, underfloor storage heating or fringe area direct heating, with PVC outer surface, manufactured ready for mounting, fixed to a carrier netting for installation in/under the screed, heating conductor diameter approx. 7 mm. including waterproof sleeves and colour-coded cooling conductors 4 m per side, heating conductor design: NH2GMY-90 according to VDE 0253/12.
Underfloor heating systems Underfloor heating mat HM...
Band heaters Self-regulating band heaters - per metre Connection voltage 1/N/PE ~230 V, 50 Hz Gutter heater or pipe trace heater with a flexible self-limiting band heater, used for frost protection on (vertical) pipes, in gutters or on roof surfaces. Consists of two parallel tin-plated stranded copper wires and an intermediate heating element, tin-plated copper protective jacket, polyolefin outer surface, VDE certification. Different heat output and operating range, depending on the design.
Control and regulation devices Control and regulation devices for band heaters Electronic ice and snow detector Order reference Art.-no. Features EM 1773 361710 Digital ice and snow detectors for use in combination with one or two combined humidity and temperature sensors (type EF 3354/EF 3351) for gutters, flat roofs and parabolic aerials.
Control and regulation devices DC charge controls for storage heating systems Universal DC charge control with timer function Control voltage 0.91 bis 1.43 V Control voltage 2 -3.6 bis -2.85 V Dimplex PROTOMATIK ® ZW 05DCU Universal DC microprocessor-driven charge control with timer function for backward, intermediate and forward control, two control voltage outputs 0.91 to 1.43 V DC and -3.6 to -2.
Control and regulation devices AC charge controls for storage heating systems AC charge control with timer function Control voltage ~230 V Operating time system 37% - 80% einstellbar Dimplex PROTOMATIK ® ZWM 05AC For storage heaters with thermomechanical AC charge controller and duo-electronic storage heaters.
Control and regulation devices Room temperature controller Order reference Art.-no. Features 355480 Electromechanical temperature controller (bimetal) with thermal feedback, switching capacity 230 V / 2 (1) A, IP 30, controlling range 5 °C to 30 °C, temperature lowering at night by remote control (approx. 4 K), extremely thin casing, colour alpine white, temperature range limitation in the casing cover, surface mounting.
Control and regulation devices ON/OFF room temperature controller with plug Order reference Art.-no. Features Width x Height x Depth mm RT 104 ST 348180 Plug thermostat (bimetal) for plugging into a socket, control range 5–30 °C, temperature range limitation in the casing cover, switching capacity 250 V AC/13 (4) A, max.
Control and regulation devices Integrated room temperature controller Order reference Art.-no.
Control and regulation devices Floor temperature controller with timer Order reference BTU 401 UN Art.-no.
Control and regulation devices Floor temperature limiter Capillary tube controller for temperature limiting, setting range 0–60 °C, switching contact 230 V/15 (8) A, using flush box (100 x 100 mm) and sensor sleeve, capillary tube length 2.4 m, degree of protection IP20 (when mounted in flush box). Order reference Art.-no.
Domestic hot water appliances Instantaneous water heater ecotronic Connection voltage 3/PE ~400 V, 50 Hz Degree of protection IP 25 Instantaneous water heater with electronic output adjustment, infinitely variable temperature, settings adjusted with rotary knob. Bare-wire heating system for instant domestic hot water heating and high resistance to lime scale. Reduced switch-on volume flow of 2.
Domestic hot water appliances Compact hot water cylinder for mounting under a Connection voltage 1/N/PE ~230 V, 50 Hz Degree of protection IP 24 worktop Pressureless design, temperature setting range 35–85 °C with energy-saving and frost protection settings, connection cable and plug, water connections metal G ³/8“, safety temperature limiter with reset function. ACK 5 U Order reference Art.-no.
Domestic hot water appliances Single-circuit wall cylinder Degree of protection IP 24 Single-circuit wall cylinders for closed or open use, infinitely variable temperature adjustment from 25–85 °C, inner water reservoir made of steel with special enamelling, anti-corrosion bar (protection anode), high-quality thermal insulation for minimal heat loss, three individual heating elements in an enamelled protection tube (can be replaced individually without draining the device), sheet steel outer surface.
Domestic hot water appliances Components for flow heaters Heating element complete (DEH ..00/01; DEE ..00/00L; DEC ..00) DLE HK .. Order reference Art.-no. Features DLE HK 30 340460 Heating element 3.0 kW for DEH, DEE, DEC flow heaters DLE HK 35 340470 Heating element 3.5 kW for DEH, DEE, DEC flow heaters DLE HK 40 340480 Heating element 4.0 kW for DEH, DEE, DEC flow heaters DLE HK 45 340490 Heating element 4.5 kW for DEH, DEE, DEC flow heaters DLE HK 60 340500 Heating element 6.
Index Type Order reference EAN code Page Type Order reference EAN code Page 2NC8 042 4X 2NC80424X 7036088801195 85 BKOi 25 328580 4015627328587 2NC8 062 2F 2NC80622F 7036088800648 85 BRTU 101UN 363960 4015627363960 103, 105 2NC8 062 4B 2NC80624B 7036088801560 84 BS 1201 S 356650 4015627356658 90 2NC8 062 4F 2NC80624F 7036088800426 85 BS 1801 S 356640 4015627356641 90 2NC8 102 2F 2NC81022F 7036088800662 85 BS 1801 W 356630 4015627356634 90 2NC8 102 4B 2NC81024
Index Type Order reference EAN code Page Type Order reference EAN code Page DMK 600-1 356120 4015627356122 22 ESF ZKM IC260600 4021481260604 75 DMK 700 340280 4015627340282 22 ESFZ 1212 K IC260350 4021481260352 74 DMK 700-1 356130 4015627356139 22 ESFZ 1818 K IC260360 4021481260369 74 DMK 800 340290 4015627340299 22 ESFZ 2425 K IC260370 4021481260376 74 DMK 800-1 356140 4015627356146 22 ESFZ 3032 K IC260380 4021481260383 74 DMK 900-1 358280 4015627358287 2
Index Type Order reference EAN code Page FG 3115 336620 4015627336629 54, 101, 106 FLH 25M 349430 4015627349438 45 FLH 60 338060 4015627338067 FLH 90 366130 FLHU 70 338070 FPE 051 H Order reference EAN code HL 185 T 335780 4015627335783 HL 185/2 335790 4015627335790 86 45, 46 HL 185/3 335960 4015627335967 86 4015627366138 45 HM 100 R 100 320660 4015627320666 96 4015627338074 45 HM 110 R 120 320700 4015627320703 96 348740 4015627348745 80 HM 120 R 140 319280
Index Type Order reference EAN code Page Order reference EAN code HM 750 TS Set BRTU 366390 4015627366398 94 L HM 750 TS Set BT 350880 4015627350885 95 HM 750 TS Set BTU 350940 4015627350946 95 LA 11ASR 342730 4015627342736 11 LA 11MAS 363760 4015627363762 HM 900 TS 150-5 343850 4015627343856 10 94 LA 11MSR 342690 4015627342699 HM 900 TS Set BRTU 366400 10 4015627366404 94 LA 11PS 353320 4015627353329 HM 900 TS Set BT 11 350890 4015627350892 95 LA 11TAS 36257
Index Type Order reference EAN code Page LUH 600 358620 4015627358621 23 LUH 700 358630 4015627358638 23 LUH 800 358640 4015627358645 LUS 11 337390 LUS 16 337400 LWPM 410 339410 Type Order reference EAN code Page QHS 600BS A 105125 4015627365810 QHS 650UWS A 105019 4015627365803 93 23 QHS 700UST 105265 4015627365865 93 4015627337398 22 QHS 800BK 105252 4015627365841 93 4015627337404 22 4015627339415 53 RAT 060I 361470 4015627361478 99 RBG WPM 339700 4015
Index Type Order reference EAN code Order reference EAN code SCHT 975-3 322260 4015627322264 14 SCHT 975-4 330540 4015627330542 14 SOLC 180 PAG 360550 4015627360556 61 SOLC 180 WAE 360600 4015627360600 SE 30T 362480 4015627362482 61 60 SOLC 180 WAG 360590 4015627360594 SE 40T 362490 61 4015627362499 60 SOLC 220 360520 4015627360525 61 SE 50T SE 60T 362500 4015627362505 60 SOLC 220 BAE 360660 4015627360662 62 362510 4015627362512 60 SOLC 220 BAG 360650 40156
Index Type Order reference EAN code Page SVT 400 348930 4015627348936 34 SVT 400KV 363880 4015627363885 34 SWPR 200 359470 4015627359475 SWPR 500 337500 SYL 250 Order reference EAN code VFDi 30C/HFi 318 345050 4015627345058 68 VFDi 30C/HFi 324 345060 4015627345065 68 34 VFDi 30C/HFi 330 345070 4015627345072 68 4015627337503 34 VFDi 30C/HFi 340 345080 4015627345089 68 352260 4015627352261 23, 31 VFDi 40C/HFi 425 345090 4015627345096 68 SZB 1000 352290 40156273
Index Type Order reference EAN code Page VTDi 45C/HTi 4545 346200 4015627346208 71 VTDi 60C/HTi 6048 346210 4015627346215 71 VTDi 60C/HTi 6060 346220 4015627346222 VTDi 75C/HTi 7560 346230 VTDi 75C/HTi 7575 Order reference EAN code WWSP 332 346610 4015627346611 44 WWSP 432 SOL 361080 4015627361089 44, 64 71 WWSP 442E 353370 4015627353374 28, 32 4015627346239 71 WWSP 442E 353370 4015627353374 45 346240 4015627346246 71 WWSP 540 SOL 361090 4015627361096 44, 64 VW
Subject to colour deviations and technical modifications without notice: AU 05/12.2 · Art. no. 763v2 Product Range Overview 2012 Product Range Overview 2012 Renewable Energies Heat Pumps Solar Thermal Systems Domestic Heating Products 2012 Visit www.dimplex.de and www.heating-with-heatpump.com for further up-to-date information Heat Pumps Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach, Germany Phone: +49 9221 709-201 Fax: +49 9221 709-233 09221709233@dimplex.de www.
