Technical data

www.dimplex.de/en
106
2012
Floor temperature limiter
TB 072
Capillary tube controller for temperature limiting, setting range 0–60 °C, switching contact 230 V/15 (8) A, using flush box (100 x 100 mm)
and sensor sleeve, capillary tube length 2.4 m, degree of protection IP20 (when mounted in flush box).
Order reference Art.-no. Width x Height x Depth
mm
TB 072 317190
107 x 107 x 43
TB 072 317190 4015627317192
Control and regulation devices
Heating/cooling ON/OFF room temperature controller
In flat switch mounting frame for flush mounting
RTK 601U
TPF 341
Order reference Art.-no. Features Width x Height x Depth
mm
RTK 601U 355610
Electronic ON/OFF room temperature controller for heating/cooling;
switchable between heating and cooling operating modes via the external
changeover contact on the heat pump manager; flat switch mounting
frame for flush mounting as standard; can be installed in virtually all flat
switch programs using an adapter element (50 x 50 mm according to DIN
49075) provided by the flat switch program manufacturer; switch ON/
frost protection; control range 5–30 °C; thermostat dial; temperature range
limitation in the casing cover; operating voltage 24 V ~/50 Hz; switching
capacity 24 V AC ~/1A, can control up to 5 valve actuators (24 V~ closed
when de-energised), IP30 when flush-mounted, colour alpine white (similar
to RAL 9010). Dew point sensor TPF 341 for interrupting cooling operation
when there is risk of condensate, optional connection (dew point sensors
are not included in the scope of supply).
82 x 86 x 45
RTK 602U 355620
Mechanical ON/OFF room temperature controller with changeover
switching contact for heating and cooling in combination with a heat
pump. The ‚heating‘ or ‚cooling‘ switching response can be chosen via a
switch. When the heat pump is in cooling operation, the room temperature
controller must be manually set to cooling operation. Heating or cooling
operation is based on the setting of the heat pump manager. Flat switch
mounting frame for flush mounting as standard; can be installed in virtually
all flat switch programs using an adapter element (50 x 50 mm according to
DIN 49075) provided by the flat switch program manufacturer (not included
in the scope of supply); control range 5–30 °C; thermostat dial; tempera-
ture range limitation in the casing cover; switching capacity 230 V AC / 5
(2) A; connection of up to 5 actuators possible, IP30 when flush-mounted,
colour alpine white (similar to RAL 9010). Dimensions in mm (W x H x D)
81 x 85 x 28.5 (height 16 mm mounted in flush box).
Connection of a dew point sensor to interrupt the cooling operation if there
is risk of condensate formation. This must be carried out using a higher-level
regulation system (e.g. RKS WPM).
81 x 85 x 16
TPF 341 350980
Flexible PCB which transmits a signal to the room temperature controller
(RTK 601U) when it comes into contact with moisture, connection lead
(10 m, 2 x 0.25 mm²).
38 x 40
When the dew point sensor comes into contact with condensation, the cooling of a room is interrupted by the motors attached to the room
temperature controller.
RTK 601U 355610 4015627355613
RTK 602U 355620 4015627355620
TPF 341 350980 4015627350984
Temperature sensor
F 3110
F 3128
FG 3115
TFH 821
Order reference Art.-no. Features
F 3110 329940
Temperature sensor: can be used as floor or external temperature sensor e.g. for AR 05DCU, connec-
tion cable 20 m, sensor sleeve (D
E
x H) 12/10 mm (flat) x 50 mm, standard NTC sensor according to
DIN 44574.
F 3128 343140
Standard NTC compact sensor according to DIN 44574 for use as floor or external temperature sensor,
flow and return insertion, domestic hot water cylinder sensor, connection cable 6 m, sensor sleeve
(D
E
x L) 6.2 x 32 mm.
FG 3115 336620
Standard NTC-2 temperature sensor (2.43 kOhm/20 °C) according to DIN 44574 with weather proof
casing for surface mounting, terminal connection.
TFH 821 354470
Sensor sleeve for floor temperature sensor. Putting the sensor in the sleeve with a heat transfer
compound. Sensor sleeve must be laid in the heating mat level.
F 3110 329940 4015627329942
F 3128 343140 4015627343146
FG 3115 336620 4015627336629
TFH 821 354470 4015627354470