Technical data
www.dimplex.de/en
18
2012
Air-to-water heat pump with 90° air deflection
Max. flow temperature 60 °C
Casing colour White (similar to RAL 9003)
Low temperature air-to-water heat pump
Compact design
LIK 8TES
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into
a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD).
The integrated air circuit with 90° air deflection enables installation in a corner without air ducts or wall installation with air ducts on
the air outlet side. Sound-optimised through low-noise axial fan and vibration-isolated compressor. High coefficients of performance
(COP) using an evaporator optimised for heating operation and energy-efficient defrosting by reverse circulation. Compact design with
optional domestic hot water preparation and integrated components for direct connection of an unmixed heating circuit (must not be
used for bivalent systems):
• Expansion vessel (24 l)
• Heat circulating pump (efficiency class A, note the free compression)
• Overflow valve and safety module
• Buffer tank (50 l) with integrated 2 kW heating element
At an external temperature of -10 °C, the maximum flow temperature that can be achieved is 53 °C. Soft starter, integrated flow and
return sensors; external sensor (standard NTC-2) and 3 flexible connecting hoses (1“, 500 mm) included in the scope of supply.
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 °C ;
Refrigerant R410A ; Control voltage ~230 V ; Connection heating 1 ˝
Order reference Art.-no. Heat output
1 compressor /
COP A2/W35
Connection
voltage
Air outlet Width x Height x Depth
mm
Weight
kg
LIK 8TES 366030
6.6 / 3.5 3/PE ~400 V, 50 Hz Right 750 x 1900 x 680 236
Heat output and COP according to EN 14511 at A2/W35.
Available for delivery from May 2012 onwards .
LIK 8TES 366030 4015627366039
Max. flow temperature 60 °C
Casing colour White (similar to RAL 9003)
Low temperature air-to-water heat pump
Universal design
LI 9TES
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into
a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). The
integrated air circuit with 90° air deflection enables installation in a corner without air ducts or wall installation with air ducts on the air
outlet side. Sound-optimised through low-noise axial fan and vibration-isolated compressor. High coefficients of performance (COP)
using an evaporator optimised for heating operation and energy-efficient defrosting by reverse circulation. Universal design with optio-
nal domestic hot water preparation and flexible expansion possibilities for:
• Bivalent or bivalent-renewable operating mode
• Distribution systems with unmixed and mixed heating circuits
• Built-in pipe heater (2/4/6 kW)
At an external temperature of -10 °C, the maximum flow temperature that can be achieved is 53 °C. Soft starter, integrated flow and
return sensors; external sensor (standard NTC-2) included in the scope of supply.
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 °C ;
Refrigerant R410A ; Control voltage ~230 V ; Connection heating 1 ˝ ; Connection voltage 3/N/PE ~400 V, 50 Hz
Order reference Art.-no. Heat output 1 compressor /
COP A2/W35
Air outlet Width x Height x Depth
mm
Weight
kg
LI 9TES 366040
6.6 / 3.5 Right 750 x 1250 x 680 181
Heat output and COP according to EN 14511 at A2/W35.
Available for delivery from June 2012 onwards .
LI 9TES 366040 4015627366046
Air-to-water heat pump for indoor installation