Technical data

www.dimplex.de/en
34
2012
Special accessories for brine-to-water heat pumps
Connection package brine circuit manifold
AP SVT
AP SVT 16
The AP SVT connection package makes the connection of a maximum of 8 circuits possible.
The AP SVT 16 connection package makes the connection of a maximum of 2 x 8 circuits possible using a T joint.
Order reference Art.-no. Features Weight
kg
AP SVT 348900
Brine circuit manifold connection package consisting of two 1½“ ball valves, two end caps
with 2“ seals and two filling and drain cocks; 1½“ internal thread connection to the heat
pump.
3 .0
AP SVT16 356060
Connection package brine circuit manifold consisting of: 2 ball valves 2“; 2 T joints 2“; 4 end
caps with seals 2“; 4 filling and drain cocks; heat pump connections 2“ internal thread.
4 .0
AP SVT 348900 4015627348905
AP SVT16 356060 4015627356061
Brine circuit manifold with clamping ring fitting
SVT 300KV
Brine circuit manifold with ball valves and clamping ring fittings for direct connection of the collector/heat exchanger pipes; consisting
of a brine collector and manifold, 2“ external thread/internal thread, 1“ screw connections with ball valves and clamping ring fittings
DN 32, material MS58.
Connection package AP SVT up to max. eight circuits or AP SVT 16 up to max. 2 x 8 circuits must be ordered separately.
Order reference Art.-no. Number of brine circuits Heat source connection
˝
Length
mm
Weight
kg
SVT 200KV 363860
2
2
170 5 .0
SVT 300KV 363870
3 250 7.3
SVT 400KV 363880
4 330 9.2
SVT 200KV 363860 4015627363861
SVT 300KV 363870 4015627363878
SVT 400KV 363880 4015627363885
Brine circuit manifold
SVT 300 with AP SVT
SVT 400
Brine circuit manifold with ball valves (1“ internal thread), brine collector (1“ external thread), max. eight circuits can be screwed together
(flat seal), MS58 material.
Connection package AP SVT up to max. eight circuits or AP SVT 16 up to max. 2 x 8 circuits must be ordered separately.
Order reference Art.-no. Number of brine circuits Heat source connection
˝
Length
mm
Weight
kg
SVT 200 348910
2
2
160 4 .0
SVT 300 348920
3 240 4.2
SVT 400 348930
4 320 5.1
SVT 200 348910 4015627348912
SVT 300 348920 4015627348929
SVT 400 348930 4015627348936
Low-pressure brine switch
SWPR 500
Pipe assembly internal thread/external thread with connecting plug for installation in the brine circuit – installation length 190 mm
(SWPR 500) and 150 mm (SWPR 200). When a pressure drop occurs in the brine circuit, a digital blocking signal is transmitted to the heat
pump manager. The built-in PS3-W pressure switch complies with the DIN 32 733 / EN 12 263 standard type examination. Switch-on
point/switch-off point 0.5/1.3 bar
Order reference Art.-no. Heat source connection
˝
Weight
kg
SWPR 500 337500
1½ 1.1
SWPR 200 359470
¾ 0.6
A low pressure brine switch is only necessary if legally required.
SWPR 500 337500 4015627337503
SWPR 200 359470 4015627359475
Heat pump for heating purposes - ground as heat source
Brine circuit antifreeze
AFN 825
Pure monoethylene glycol without anticorrosive for mixing with water, 25 vol % antifreeze for frost protection to -14 °C.
Order reference Art.-no. Nominal capacity
l
Weight
kg
AFN 825 328610
20 22
AFN 824 324610
200 220
AFN 825 328610 4015627328617
AFN 824 324610 4015627324619