Technical data

www.dimplex.de/en
43
2012
Floor-mounted buffer tank, solar
PSW 1000 SOL
Nominal capacity 1000 litres, including six 1½“ sleeves for immersion heaters (up to CTHK 636), 3 m² solar heat exchanger (for a solar coll-
ector area of up to 16 m
2
), three ½“ immersion sleeves for temperature sensors, 2½“ heating water connections and 3 supporting feet.
Separate polyurethane insulation (100 mm insulation thickness) for low downtime losses, removable (can be used for heating), colour
white aluminium (similar to RAL 9006); diameter (without insulation) 790 mm, tilting dimension (without insulation) 2018 mm.
Order reference Art.-no. For device type Diameter x Height
mm
Weight
kg
PSW 1000 SOL 363660
Up to SI 130
Up to WI 100
Up to LA 60
790 x 1970 139
Note: Observe the basic dimensions of the cylinder! The connecting stubs of the cylinder extend a further 100 mm beyond the tank container
itself (diameter 790 mm).
PSW 1000 SOL 363660 4015627363663
Immersion heater
CTHK ...
For electrical supplementary heating in mono-energy operation; consists of individual heating elements with temperature controller,
safety temperature limiter, degree of protection IP54, 1½“ external thread with plastic cover, fulfils the requirements of EN 60335, Part 1.
Not suitable for enamelled domestic hot water cylinders.
Order reference Art.-no. Connection voltage Heat output
kW
Immersion depth
mm
Unheated length
mm
Weight
kg
CTHK 630 363610
1/N/PE ~230 V, 50 Hz
4.5 400
9 5
1.9
CTHK 631 336180
2 . 0
250
1.4
CTHK 632 335910
3/PE ~400 V, 50 Hz
2.9 1.5
CTHK 633 322140
4.5 350
110
1.7
CTHK 634 322150
6 .0 450 1.8
CTHK 635 322160
7.5 550 1.9
CTHK 636 322170
9 .0 650 2.1
CTHK 630 363610 4015627363618
CTHK 631 336180 4015627336186
CTHK 632 335910 4015627335912
CTHK 633 322140 4015627322141
CTHK 634 322150 4015627322158
CTHK 635 322160 4015627322165
CTHK 636 322170 4015627322172
Solar heat exchanger for universal buffer PSW 500
RWT 500
For connection of an external supplementary heating system with required system separation (e.g. solar) in connection with the PSW
500 universal buffer tank. Consists of a flange cover with anti-twist protection and 2.3 m² heat exchanger (for a solar collector area of up
to approximately 10 m²), ¾“ external thread connection, TK 210/8.
Order reference Art.-no. For device type Immersion
depth
mm
Heat exchange
surface
m²
Collector
surface
m²
Transmission
capacity
kW
Weight
kg
RWT 500 339840
PSW 500 590 2.3 10 .0 9 .0 11.1
RWT 500 339840 4015627339842
Immersion heater pipe assembly
HDLR 450
Insulated pipe assembly for screwing in a 1½“ immersion heater (CTHK 631, CTHK 632, CTHK 633 or CTHK 634); integration into the flow
for volume flows up to 2.5 m³/h; 1¼“ heating water connection; installation material for wall mounting included in the scope of supply.
Immersion heater (CTHK ...) must be ordered separately.
Order reference Art.-no. For device type Weight
kg
HDLR 450 337450
CTHK 630-634 5 .0
HDLR 450 337450 4015627337459
Pipe heater
HCT 300
Insulated built-in 3 kW heating element for the flow (1“ flat sealing), max. volume flow 1.5 m³/h, control range 20–75 °C, degree of pro-
tection IP44, safety temperature limiter, 16 A fuse protection.
Order reference Art.-no. Connection voltage Heat output
kW
Weight
kg
HCT 300 351210
1/N/PE ~230 V, 50 Hz 3 .0 3.5
HCT 300 351210 4015627351219
Accessories for heat pumps for heating purposes