Technical data

www.dimplex.de/en
47
2012
Heat pump/solar combo tank
Combo tank for integrating solar energy
Domestic hot water heating in flow principle
PWD 750
PWD 900
Upright cylinder for heating and domestic hot water preparation with central flow, with three internally tin-plated heat exchangers
(external pipework necessary); consisting of a buffer tank for heating and a buffer tank for domestic hot water; heating buffer tank used
as a preheating stage for domestic hot water preparation. A circular plate prevents the different water layers with varying temperatures
from becoming mixed together; integrated heat riser pipes distribute the energy from an additional heat generator (e.g. solar, wood boi-
ler) to the supplementary heating system and the domestic hot water preparation according to the temperature; flange connection for
integration of an optional solar heat exchanger (special accessory RWT); NTC-2 and NTC-10 temperature sensors included in the scope of
supply; 125 mm PE foam insulation delivered separately; colour: white.
PWD 750 combo tank:
200 l buffer tank for heating and 550 l buffer tank for domestic hot water; one 1½“ sleeve each for immersion heaters in the heating
buffer tank and the domestic hot water buffer tank (CTHK 635 and 636); tank charging for domestic hot water preparation up to a maxi-
mum of 2.5 m
3
/h and 30 kW heat output; tilting dimension 1920 mm. The VS PWD special accessory is available for the external pipework
required by the PWD 750.
PWD 900 combo tank:
250 l buffer tank for heating and 650 l buffer tank for domestic hot water; 1½“ sleeves for immersion heaters (two in the heating buffer
tank and one in the domestic hot water buffer tank - CTHK 635 and 636); tank charging for domestic hot water preparation up to a maxi-
mum of 3.0 m
3
/h and 40 kW heat output; tilting dimension 2205 mm.
PWD 1250 combo tank:
400 l buffer tank for heating and 850 l buffer tank for domestic hot water; 1½“ sleeves for immersion heaters (two in the heating buffer
tank and one in the domestic hot water buffer tank (CTHK 635 and 636); tank charging for domestic hot water preparation up to a maxi-
mum of 3.5 m
3
/h and 60 kW heat output; tilting dimension 2200 mm.
Observe the basic dimensions of the PWD 1250: Tank diameter 1000 mm (without insulation).
Order reference Art.-no. For device type Diameter with
insulation
mm
Diameter x Width x Height
x Depth
mm
Weight
kg
PWD 750 349100
Up to a heat output max. 30 kW
Up to a volume flow of max. 2.5 m³/h
1040
1040 x 790 x 1730 x 790 246
PWD 900 362860
Up to a heat output max. 40 kW
Up to a volume flow of max. 3.0 m³/h
1040 x 790 x 2050 x 790 296
PWD 1250 362890
Up to a heat output max. 60 kW
Max. volume flow of 3.5 m
3
/h
1200 1250 x 1000 x 1950 x 1000 407
Cannot be used with reversible heat pumps and water hardness above 14° dH. Dimensional specifications for width, height and depth refer to the
cylinder without insulation. The pouring output can be found in the device information, which can be downloaded at www.dimplex.de.
PWD 750 349100 4015627349100
PWD 900 362860 4015627362864
PWD 1250 362890 4015627362895
Connection kit for PWD heat exchanger
VS PWD
For easy installation of the external pipework of the 3 integrated domestic hot water heat exchangers of the PWD. Consists of two
flexible pre-assembled corrugated stainless steel DN 16 pipes (1000/500 mm), insulation thickness 13 mm, ¾“ cap nut on both ends,
transitional screw connections and seal; maximum operating pressure 7 bar.
Order reference Art.-no. For device type Weight
kg
VS PWD 354030
PWD 5 .0
VS PWD 354030 4015627354036
Immersion heater for PWD combo tank
CTHK ...
For PWD combo tanks, immersion heaters with an unheated length of 110 mm are used to support heating and domestic hot water
preparation.
Order reference Art.-no. Connection voltage Heat output
kW
Immersion depth
mm
Unheated length
mm
Weight
kg
CTHK 635 322160
3/PE ~400 V, 50 Hz
7.5 550
110
1.9
CTHK 636 322170
9 .0 650 2.1
CTHK 635 322160 4015627322165
CTHK 636 322170 4015627322172
Accessories for heat pumps for heating purposes