Technical data

ManualsBrandsDimplex ManualsHeat PumpLA 12 MI

www.dimplex.de/en

2012

Heat pump - air/waste heat as heat source

Domestic hot water heat pump –

heat source indoor air/cellar air/outside air

Domestic hot water temperature up to max. 60 °C

Lower operating limit heat source (heating operation) 8 °C

Upper operating limit heat source (heating operation) 45 °C

Domestic hot water heat pump

Additional heat exchanger with solar function

BWP 30HS

Heat pump for domestic water heating, with LCD and extensive control functions (e. g. fast heating button, solar control, time program

for increasing the solar energy output by blocking domestic hot water preparation). Digital input for the use of privately generated elec-

tricity through combination with photovoltaic systems. EC radial fan, exhaust air and extract air stubs for optional connection of a duct

system with a maximum length of 10 m, mean heat pump output 1870 W (A15/W45), domestic hot water temperature selectable during

heat pump operation (25–60 °C); heating up to 65 °C possible via time programs with standard heating element (1.5 kW), refrigerant

designation R 134a. Steel cylinder with a usable capacity of 290 l, enamelled according to DIN 4753, protection anode against corro-

sion, integrated additional heat exchanger (approx. 1.45 m² for the connection of an external heat generator (e. g. boiler or solar energy

system), cladding tube for external cylinder sensor, digital output for controlling an external loading pump. Foil cladding colour white

(similar to RAL 9003), design front panel and cover white aluminium (similar to RAL 9006).

Order reference Art.-no. Connection voltage COP (EN 255) heat-up process

15 °C to 45 °C

Width x Height x Depth

Weight

BWP 30HS 360070

1/N/PE ~230 V, 50 Hz 3.7 700 x 1710 x 790 150

Nipple size DN 160, connection e. g. with SF R 162510 air hose or BGN 160.

To prevent an air short circuit, a room height of approx. 2.5 m is necessary for free blowing systems. The minimum height of the installation room

is reduced to approximately 2 m by installing a pipe bend on the air outlet side, or by connecting the system to an air duct. The PT 1000 collector

sensor required for solar control must be ordered as a special accessory. The maximum domestic hot water temperature reachable and the lower

operating limit vary by ±2 K due to component tolerances.

BWP 30HS 360070 4015627360075

Domestic hot water temperature up to max. 60 °C

Lower operating limit heat source (heating operation) -8 °C

Upper operating limit heat source (heating operation) 45 °C

Domestic hot water heat pump with defrosting

Additional heat exchanger with solar function

BWP 30HSD

Heat pump for domestic water heating, with LCD and extensive control functions (e. g. fast heating button, solar control, time program

for increasing the solar energy output by blocking domestic hot water preparation). Digital input for the use of privately generated

electricity through combination with photovoltaic systems. EC radial fan, exhaust air and extract air stubs for optional connection of a

duct system with a maximum length of 10 m, mean heat pump output 1870 W (A15/W45), domestic hot water temperature selectable

during heat pump operation (25–60 °C); heating up to 65 °C possible via time programs with standard heating element (1.5 kW), refrige-

rant designation R 134a. Extended operating limits via active defrosting when ice forms on the evaporator. Steel cylinder with a usable

capacity of 290 l, enamelled according to DIN 4753, protection anode against corrosion, integrated additional heat exchanger (approx.

1.45 m² for the connection of an external heat generator (e. g. boiler or solar energy system), cladding tube for external cylinder sensor,

digital output for controlling an external loading pump. Foil cladding colour white (similar to RAL 9003), design front panel and cover

white aluminium (similar to RAL 9006).

Order reference Art.-no. Connection voltage COP (EN 255) heat-up process

15 °C to 45 °C

Width x Height x Depth

Weight

BWP 30HSD 363620

1/N/PE ~230 V, 50 Hz 3.7 700 x 1710 x 790 150

Nipple size DN 160, connection e. g. with SF R 162510 air hose or BGN 160.

To prevent an air short circuit, a room height of approx. 2.5 m is necessary for free blowing systems. The minimum height of the installation room

is reduced to approximately 2 m by installing a pipe bend on the air outlet side, or by connecting the system to an air duct. The PT 1000 collector

sensor required for solar control must be ordered as a special accessory. The maximum domestic hot water temperature reachable and the lower

operating limit vary by ±2 K due to component tolerances.

BWP 30HSD 363620 4015627363625

Solar package (2 collectors) without solar controller

For domestic hot water heat pump BWP 30HS/HSD

SOLP 2 OR ..

Optimum solar package for BWP 30HS/HSD to support domestic hot water preparation for a household containing 2-4 people.

Solar regulation is via the domestic hot water heat pump (Connection PT 1000 sensor).

• 2 x SOLCU 180 solar controller

• 1 x SOLPU S solar station

• 1 x SOLVK 1 expansion vessel connection

• 1 x SOLEV 12 expansion vessel

• 1 x SOLHT 20 heat transfer fluid

• 1 x basic set for collector installation

• 1 x expansion set for collector installation

• 1 x PT 1000 solar sensor

Order reference Art.-no. Roof mounting kit

SOLP 2 OR PA 365410

Frankfurt tile

SOLP 2 OR BA 365420

Plain tile

SOLP 2 OR WA 365430

Corrugated sheet

SOLP 2 OR FA 365440

Free standing

SOLP 2 OR PA 365410 4015627365414

SOLP 2 OR BA 365420 4015627365421

SOLP 2 OR WA 365430 4015627365438

SOLP 2 OR FA 365440 4015627365445

Domestic hot water temperature up to max. 60 °C

Lower operating limit heat source (heating operation) 8 °C

Upper operating limit heat source (heating operation) 35 °C

Domestic hot water heat pump with foil cladding

With air duct connection

BWP 30HM

Insulated foil cladding, radial fan, exhaust air and extract air stubs for optional connection of a duct system with a maximum length of

10 m, infinitely variable hot water temperature for total volume of 300 l, switches for heat pump and heating element, steel cylinder en-

amelled according to DIN 4753, protection anode against corrosion, mean heat pump output 1870 W, hot water temperature selectable

during heat pump operation (25–60 °C), heating up to 65 °C with standard heating element (1.5 kW) possible, can controlled manually or

remotely using an external timer, refrigerant designation R134a, colour white (similar to RAL 9003).

Order reference Art.-no. Connection voltage COP (EN 255) heat-up process

15 °C to 45 °C

Width x Height x Depth

Weight

BWP 30HM 364840

1/N ~230 V, 50 Hz 3.5 700 x 1710 x 770 135

Nipple size DN 160, connection e. g. with SF R 162510 air hose or BGN 160.

The maximum domestic hot water temperature reachable and the lower operating limit vary by ±2 K due to component tolerances. To prevent an

air short circuit, a room height of approx. 2.5 m is necessary for free blowing systems. The minimum height of the installation room is reduced to

approximately 2 m by installing a pipe bend on the air outlet side, or by connecting the system to an air duct.

BWP 30HM 364840 4015627364840