Technical data

www.dimplex.de/en
60
2012
Heat pump module – heat source indoor air
Max. flow temperature 65 °C
Air-to-water heat pump
For utilisation of waste heat
LI 2M
A heat pump module for utilisation of waste heat; integrated radial fan, exhaust air and extract air stubs for optional connection of a duct
system DN 160 (maximum pipe length 10 m), infinitely variable return set temperature. The generated heat output is transferred via an
integrated stainless steel heat exchanger (external circulating pump required). The cooled air can be blown out into the installation room
or guided outside via ducts. Heat output approx. 2 kW, with an exhaust air temperature of 25 °C and a heating water outlet temperature
of 35 °C.
Lower operating limit heat source (heating operation) 0 °C ; Upper operating limit heat source (heating operation) 40 °C ;
Refrigerant R134a ; Control voltage ~230 V ; Connection heating ½ ˝
Order reference Art.-no. Short text Width x Height x Depth
mm
Weight
kg
LI 2M 356330
Heat pump module 450 x 725 x 550 54
LI 2M 356330 4015627356337
Heat pump - air/waste heat as heat source
Swimming pool dehumidifier
Degree of protection IP 34
Lower operating limit heat source (heating operation) 15 °C
Upper operating limit heat source (heating operation) 38 °C
Swimming pool dehumidifier
SE ...T
Cabinet unit for dehumidifying rooms with swimming pools in recirculating air operation with active heat recovery using the heat pump.
The integrated control can be used to control the humidity and, depending on the scope of supply, the temperature. Operating modes
and settings are shown on and entered via the integrated display. Installation inside the room housing the swimming pool without duct
connection. Air intake and air outlet directly at the installation location, no air circuit ducts required. Air intake via perforated metal plate
grid, air outlet with rotating, chromed air grids for targeted air circuit on the device top. Front panel made of saltwater-proof anodised
aluminium; side and back panel made of blue plastic (similar to RAL 5002). Sound and vibration-isolated compressor decoupled from the
casing; with heat exchangers with corrosion-resistant coating; automatic defrosting as standard.
Order reference Art.-no. Dehumidification out-
put at 30 °C/60% rH
kg/h
Air
volume flow
m³/h
Maximum pool
surface area
m²
Connection
voltage
Width x Height
x Depth
mm
Weight
kg
SE 30T 362480
2 . 0
700
3 0
1/N/PE ~230 V,
5 0 H z
1200 x 880 x 350
59
SE 40T 362490
3 . 0 4 0 7 7
SE 50T 362500
4 . 0
900
5 0
3/N/PE ~400 V,
5 0 H z
80
SE 60T 362510
5.2 60 83
The maximum pool surface area is designed for periodically used swimming pools without an overflow gutter, with a swimming pool cover and a
maximum of 2 hours pool usage per day.
SE 30T 362480 4015627362482
SE 40T 362490 4015627362499
SE 50T 362500 4015627362505
SE 60T 362510 4015627362512
Accessories for swimming pool dehumidifiers
Order reference Art.-no. Features
WKS SE 357080
Bracket set for off-ground wall mounting.
PWW HRG 356920
Heat exchanger for subsequent air heating, including control valve and flexible connecting hoses
to prevent solid-borne noise transmission. The isolation valves and dirt traps must be installed
by the customer (heat output with indoor air 29 °C / flow temp. 40 °C: 1.4 kW (SE 30T/SE 40T);
1.6 kW (SE 50T/SE 60T).
WKS SE 357080 4015627357082
PWW HRG 356920 4015627356924