Technical data

www.dimplex.de/en
7
2012
Electric connection line heat pump – heat pump manager
Essential accessory for heat pumps with electronic expansion valve
EVL 10UE
Three separate control lines between the WPM EconPlus heat pump manager and the high-efficiency air-to-water heat pump with
electronic expansion valve for outdoor installation. Wired ready for use with coded plug connections (non-confusable thanks to identical
connections at both ends of the cable) for installation in a protective tube (minimum tube Ø 70 mm).
Order reference Art.-no. For device type Length
m
Weight
kg
EVL 10UE 363520
LA 6TU
LA 60TU
10 5.5
EVL 20UE 363530
20 10 .0
EVL 30UE 363540
30 15.5
EVL 40UE 363550
40 21 .0
Essential accessory for high-efficiency air-to-water heat pumps. The control line must be laid separately from the mains cable. Extension of the
control line by the customer is not permissible and may void the warranty. The max. length of the hydraulic connection should not exceed 30 m.
EVL 10UE 363520 4015627363526
EVL 20UE 363530 4015627363533
EVL 30UE 363540 4015627363540
EVL 40UE 363550 4015627363557
Weather-proof protective cover for LA...TU air-to-water heat pumps
WSH 40
Design weather-proof protective cover for retrofitting high-efficiency air-to-water heat pumps; required for uncovered outdoor installati-
on, when the air intake or the air oulet side is exposed to strong winds.
Order reference Art.-no. For device type Width x Height x Depth
mm
Weight
kg
WSH 9 362110
LA 9TU 856 x 724 x 370 12.5
WSH 12 362120
LA 12TU 1195 x 1063 x 460 17.0
WSH 25 358970
LA 17TU
LA 25TU
1600 x 1225 x 568 28 .0
WSH 40 358240
LA 40TU
LA 35TUR+
1734 x 1385 x 628 32 .0
WSH 9 362110 4015627362116
WSH 12 362120 4015627362123
WSH 25 358970 4015627358973
WSH 40 358240 4015627358249
Air-to-water heat pump for outdoor installation
Pipe assembly for LA...TU air-to-water heat pumps
For connection from the side
RBS ..U
The pipe assembly which can be screwed directly onto the heat pump consists of two pipes which are specially curved and matched to
the high-efficiency air-to-water heat pumps; these pipes have connecting flanges for the connection to the heating water system. When
the heat pump is installed close to the outer wall, these pipe assemblies – which are fed out from the side of the heat pump (base frame
on the air outlet side, on the right and below the fan, for LA 6TU on the left) – can be used to create an above-ground infeed into the
building (thermal insulation required for frost protection). In this case, the underground pipework routing for feeding the pipes into the
cellar is not required.
Order reference Art.-no. For device type Connection heating
˝
Weight
kg
RBS 6U 365040
LA 6TU 1 2.2
RBS 9U 358820
LA 9TU
1 ¼
2.3
RBS 12U 358830
LA 12TU
2.5
RBS 17U 358840
LA 17TU
RBS 25U 358850
LA 25TU
1 ½
2.7
RBS 40U 358860
LA 40TU
LA 35TUR+
3.0
RBS 40ZWT 358330
Additional heat exchanger LA 35TUR+
RBS 60U 362470
LA 60TU 2 5.2
When planning the heat pump foundation, observe the insulation thickness for flow and return, the wall clearance and the pipe slope.
RBS 6U 365040 4015627365049
RBS 9U 358820 4015627358829
RBS 12U 358830 4015627358836
RBS 17U 358840 4015627358843
RBS 25U 358850 4015627358850
RBS 40U 358860 4015627358867
RBS 40ZWT 358330 4015627358331
RBS 60U 362470 4015627362475