Technical data

www.dimplex.de/en
94
2012
Underfloor heating systems
Connection voltage 1/N/PE ~230 V, 50 Hz
Thin mortar bed heating mats HM...TS
With one-sided, sleeveless connection, self-adhesive
HM ... TS
Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch,
heating conductor made of resistance alloy according to DIN 17470 and/or DIN 17471 with Teflon insulation, surface-related consump-
tion 150 W/m², heating conductor diameter approx. 4 mm, attached to plastic fabric with one-sided cooling conductor 4 m to simplify
installation, installation width 0.5 m, VDE certification according to EN 60335-2-96.
Order reference Art.-no. Rated power
W
Surface-related
consumption
W/m²
Width
m
Length
m
Surface area
m²
HM 150 TS 150-5 351080
150 W
150 W/m² 0.5 m
2 m 1.0 m²
HM 225 TS 150-5 343800
225 W 3 m 1.5 m²
HM 300 TS 150-5 343810
300 W 4 m 2.0 m²
HM 450 TS 150-5 343820
450 W 6 m 3.0 m²
HM 600 TS 150-5 343830
600 W 8 m 4 .0 m²
HM 750 TS 150-5 343840
750 W 10 m 5.0 m²
HM 900 TS 150-5 343850
900 W 12 m 6.0 m²
Heating mat installation width, made up of the heating mat width and the installation clearance.
Heating mat can be installed variably on site.
Heated area, made up of the heating mat width and the installation clearance.
HM 150 TS 150-5 351080 4015627351080
HM 225 TS 150-5 343800 4015627343801
HM 300 TS 150-5 343810 4015627343818
HM 450 TS 150-5 343820 4015627343825
HM 600 TS 150-5 343830 4015627343832
HM 750 TS 150-5 343840 4015627343849
HM 900 TS 150-5 343850 4015627343856
Heating mat HM... TS set BRTU
with BRTU 101UN ground/room temperature controller
HM ... TS Set BRTU
Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch,
heating conductor made of resistance alloy according to DIN 17470 and/or DIN 17471 with Teflon insulation, surface-related consump-
tion 150 W/m², heating conductor diameter approx. 4 mm, attached to plastic fabric with one-sided cooling conductor 4 m to simplify
installation, installation width 0.5 m, VDE certification according to EN 60335-2-96.
Ground/room temperature controller BRTU 101UN
Electronic flush-mounted floor temperature controller (2-point) for electronic or domestic hot water heating systems (de-energised
closed actuators) with digital weekly timer for programming individual comfort and lowering times. Can be used in almost all flat switch
programmes using an adaptor element. Software switching option for using a floor temperature or room temperature controller or as a
room temperature controller with floor temperature limiter. Switching capacity ~230V / 10 (2) A, room temperature range 5–30 °C, floor
temperature 10–42 °C, setting in 0.5 K increments. Frost protection function and lowering temperature setting. NTC-2 remote sensor,
colour white.
Order reference Art.-no. Rated power
W
Surface-related
consumption
W/m²
Width
m
Length
m
Surface area
m²
HM 150 TS Set BRTU 366340
150 W
150 W/m² 0.5 m
2 m 1 .0 m²
HM 225 TS Set BRTU 366350
225 W 3 m 1.5 m²
HM 300 TS Set BRTU 366360
300 W 4 m 2.0 m²
HM 450 TS Set BRTU 366370
450 W 6 m 3.0 m²
HM 600 TS Set BRTU 366380
600 W 8 m 4.0 m²
HM 750 TS Set BRTU 366390
750 W 10 m 5.0 m²
HM 900 TS Set BRTU 366400
900 W 12 m 6.0 m²
Available for delivery from July 2012 onwards.
HM 150 TS Set BRTU 366340 4015627366343
HM 225 TS Set BRTU 366350 4015627366350
HM 300 TS Set BRTU 366360 4015627366367
HM 450 TS Set BRTU 366370 4015627366374
HM 600 TS Set BRTU 366380 4015627366381
HM 750 TS Set BRTU 366390 4015627366398
HM 900 TS Set BRTU 366400 4015627366404
Connection voltage 1/N/PE ~230 V, 50 Hz
Thin mortar bed heating mats HM … SF
To be installed directly in the tile adhesive or the levelling
HM ... SF ...
Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch,
heating conductor made of resistance alloy according to DIN 17470 and DIN 17471 with Teflon insulation, surface-related consumption
150 W/m², additional installation height approx. 5–8 mm, heating conductor diameter approx. 2.9 mm, attached to plastic fabric with
two cooling conductors (4 m each), installation width 0.9 m, VDE certification.
Order reference Art.-no. Rated power
W
Surface-related
consumption
W/m²
Width
m
Length
m
Surface area
m²
HM 300 SF 150-5 336280
300 W
150 W/m² 0.5 m
4 m 2 m²
HM 450 SF 150-5 336300
450 W 6 m 3 m²
Heating mat installation width, made up of the heating mat width and the installation clearance.
Heating mat can be installed variably on site.
Heated area, made up of the heating mat width and the installation clearance.
HM 150 SF 150-5 335580 4015627335585
HM 300 SF 150-5 336280 4015627336285
HM 450 SF 150-5 336300 4015627336308
Installation accessories for HM … SF
KED SF set
Order reference Art.-no. Features
NHD 100 319620
Special retaining dowels for fixing the heating mats to a surface, 100 pieces, length approx. 25 mm.
KED 1010 SF 329850
Cooling conductor extension for HM ... SF, with protective jacket, 1.0 mm², length 10 m, black.
NHD 100 319620 4015627319622
KED 1010 SF 329850 4015627329850