Technical data

www.dimplex.de/en
95
2012
Connection voltage 1/N/PE ~230 V, 50 Hz
Thin mortar bed heating mat set HM…TS set BTU
With floor temperature controller BTU 401 UN
HM ... TS set BTU
Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch,
heating conductor made of resistance alloy according to DIN 17470 and DIN 17471 with Teflon insulation, surface-related consumption
150 W/m², heating conductor diameter approx. 4 mm, attached to plastic fabric with one-sided cooling conductor 4 m to simplify instal-
lation, installation width 0.5 m, VDE certification according to EN 60335-2-96 with
electronic floor temperature controller BTU 401 UN
Electronic floor temperature controller with digital weekly timer for underfloor heating systems in flat switch mounting frame for flush
mounting; floor temperature sensor (standard NTC sensor, 4 m connection cable length, sensor element Ø 7 x 28 mm); can be installed
in virtually all flat switch programs using an adapter element (50 x 50 mm according to DIN 49075) provided by the flat switch program
manufacturer, switching capacity 230 V AC / 16 (2) A (NO contact), control range 10–50 °C, LCD indicating status and operating mode,
temperature setting in 0.5 K increments, 3 time programs (1, 2 or 3 heating period intervals), individual allocation of weekday and time
program, 4 operating modes can be selected (frost protection/lowering temperature/comfort temperature/timer program), programma-
ble temperature range limitation, sensor monitoring, colour alpine white, IP30, dimensions in mm (W x H x D) 81.5 x 81.5 x 44.5 (height
16 mm mounted in flush box)
Order reference Art.-no. Rated power
W
Surface-related
consumption
W/m²
Width
m
Length
m
Surface area
m²
HM 150 TS Set BTU 351070
150 W
150 W/m² 0.5 m
2 m 1 .0 m²
HM 225 TS Set BTU 350900
225 W 3 m 1.5 m²
HM 300 TS Set BTU 350910
300 W 4 m 2.0 m²
HM 450 TS Set BTU 350920
450 W 6 m 3.0 m²
HM 600 TS Set BTU 350930
600 W 8 m 4.0 m²
HM 750 TS Set BTU 350940
750 W 10 m 5.0 m²
HM 900 TS Set BTU 350950
900 W 12 m 6.0 m²
Heating mat installation width, made up of the heating mat width and the installation clearance.
Heating mat can be installed variably on site.
Heated area, made up of the heating mat width and the installation clearance.
Discontinuation
HM 150 TS Set BTU 351070 4015627351073
HM 225 TS Set BTU 350900 4015627350908
HM 300 TS Set BTU 350910 4015627350915
HM 450 TS Set BTU 350920 4015627350922
HM 600 TS Set BTU 350930 4015627350939
HM 750 TS Set BTU 350940 4015627350946
HM 900 TS Set BTU 350950 4015627350953
Connection voltage 1/N/PE ~230 V, 50 Hz
Thin mortar bed heating mat set HM…TS set BT
With floor temperature controller BT 401 UN
HM ... TS set BT
Ready for installation and connection, heating conductor with protective jacket for connecting to the fault current protective switch,
heating conductor made of resistance alloy according to DIN 17470 and DIN 17471 with Teflon insulation, surface-related consumption
150 W/m², heating conductor diameter approx. 4 mm, attached to plastic fabric with one-sided cooling conductor 4 m to simplify instal-
lation, installation width 0.5 m, VDE certification according to EN 60335-2-96 with
electronic floor temperature controller BT 401 UN
Operating voltage: 230 V, 50 Hz; switching capacity: 16 (2) A at 230 V (NO contact); control range 10–50°C; standard NTC sensor, 4 m
cable length, sensor element Ø 7 x 28 mm with flat switch mounting frame for flush mounting as standard, can be installed in virtually all
flat switch programs using an adapter element (50 x 50 mm according to DIN 49075) provided by the flat switch program manufacturer,
thermostat dial, temperature range limitation integrated in the casing cover, ON/OFF program switch, LED display for heating operation
and temperature lowering, temperature lowering by remote control (approx. 5 K), sensor monitoring, colour alpine white, IP30, dimensi-
ons in mm (W x H x D) 81.5 x 81.5 x 42.5 (height 16 mm mounted in flush box).
Order reference Art.-no. Rated power
W
Surface-related
consumption
W/m²
Width
m
Length
m
Surface area
m²
HM 150 TS Set BT 351060
150 W
150 W/m² 0.5 m
2 m 1.0 m²
HM 225 TS Set BT 350840
225 W 3 m 1.5 m²
HM 300 TS Set BT 350850
300 W 4 m 2 .0 m²
HM 450 TS Set BT 350860
450 W 6 m 3.0 m²
HM 600 TS Set BT 350870
600 W 8 m 4.0 m²
HM 750 TS Set BT 350880
750 W 10 m 5.0 m²
HM 900 TS Set BT 350890
900 W 12 m 6.0 m²
Heating mat installation width, made up of the heating mat width and the installation clearance.
Heating mat can be installed variably on site.
Heated area, made up of the heating mat width and the installation clearance.
HM 150 TS Set BT 351060 4015627351066
HM 225 TS Set BT 350840 4015627350847
HM 300 TS Set BT 350850 4015627350854
HM 450 TS Set BT 350860 4015627350861
HM 600 TS Set BT 350870 4015627350878
HM 750 TS Set BT 350880 4015627350885
HM 900 TS Set BT 350890 4015627350892
Underfloor heating systems
Installation accessories for HM...TS
KED TS Set
Order reference Art.-no. Features
KED TS Set 344010
Cooling conductor extension for TS heating mats with protective earthing connection, 1.0 mm²,
length 10 m, 10 connection sleeves. Only required when the 4 m cooling conductors attached to the
mats are not long enough.
NHD 100 319620
Special retaining dowels for fixing the heating mats to a surface, 100 pieces, length approx. 25 mm.
KED TS Set 344010 4015627344013
NHD 100 319620 4015627319622