User`s guide

Section 1: Scope of delivery and handling
Description
Qty
Protective grommet to
prevent damage to
cables (LA 12 / 16 MI
only)
2 + 3
Remote controller for
internal wall mounting
1
Remote controller
cable 15m long
1
Screw (M4 self tapping
- 14mm) for wall
attachment of remote
controller
3
Cable ties
3
Table 1: Items supplied with the LA MI
Product handling
Figure 1: Moving a heat pump with a pallet truck or similar
The heat pump is large and heavy. The
handling of the unit should only be done
using lifting tools and sling which can be
fitted into sleeves at the unit‟s base.
Use a wooden pallet for transporting the
heat pump to the final installation
location.
Note that the two metal rails that hold
the heat pump together are essential for
the structural stability and should not be
removed. Removing these rails would
invalidate the warranty.
When transporting the heat pump,
ensure that it is not tilted more than 45°
(in any direction). Tilting the heat pump
would cause the oil from the compressor
to cause damage to other components
within the refrigerant circuit.