LECKFORD LKD20-AU AUS/NZ The product complies with the Australian Safety Standards and the Standard Electromagnetic Compatibility.
1 2 A B C A 3 B D E F G D E F C
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice When using electrical appliances, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: If the appliance is damaged, check immediately with the supplier before installation and operation. Do not use this appliance in the immediate surroundings of a bath, shower or swimming pool. Do not use outdoors.
Operating Instructions - See Fig. 2&3 Icon Display A - Funtion Description Press Once to turn the product ‘ON’. Power / Press a second time to put the product into ‘STANDBY’ Standby (When returning from ‘STANDBY’ mode the product will return to previous settings unless the product has been unplugged, in which case it will reset to factory settings) ‘FLAME EFFECT’ button this turns the flame effect ON or OFF independently of the products other features.
Electrical connection Thermal Safety Cut-out Remote control - see Fig. 3 Cleaning WARNING – THIS APPLIANCE MUST BE EARTHED. This heater must be used on an AC ~ supply only and the voltage marked on the heater must correspond to the supply voltage. Before switching on, please read the safety warnings and operating instructions. The maximum range of use is ~ 5metres. Warning: It takes time for the receiver to respond to the transmitter.
Glen Dimplex Australia 8 Lakeview Drive, Scoresby, VIC 3179, Australia Glen Dimplex New Zealand Pty Ltd. 38 Harris Road, East Tamaki, Auckland 2013 New Zealand www.dimplex.com.au sales@glendimplex.com.au www.dimplex.co.nz sales@glendimplex.co.nz Ph: 1300 556 816 Ph: 0800 666 2824 © Glen Dimplex Heating & Ventilation. All rights reserved. Material contained in this publication may not be reproduced in whole or part, without prior permission in writing of Glen Dimplex Heating & Ventilation.
